1 1
-
INSTALLATION INSTRUCTIONS FOR EXISTING INSTALLATIONS
+ ____________ ____________ ___ ________ _____________
0 MTS Distribution 6.0
0 April 1988
- In the five years between the MTS/5.1 Distribution and the
MTS/6.0 Distribution, a number of incompatible changes have been
made to the MTS system internals. (All these changes are upward
compatible in the user environment.) This makes updating from a
MTS/5.1 system to a MTS/6.0 system more involved than usual
because the incompatible changes must be made.
0 There are two basic ways to consider updating to MTS/6.0.
One way is to serially make the required changes to the MTS/5.1
system you are running. The second is to save all the user
files currently in use on your system, install the MTS/6.0
system, and restore the files. This latter method is most
likely the best for sites which have no local changes to the
distributed MTS system and either have relatively few users or
use MTS for primarily one purpose (such as conferencing).
0 The most significant incompatible changes to the resident
system are discussed in the General Notes (461/33). They
include
0 ¨ The file system catalog format has changed to allow for
last data change times.
¨ The accounting record format has changed.
¨ The statistic record format has changed.
¨ The names of system files have changed to conform to new
naming conventions.
¨ Components have been changed from using the old Coding
Conventions to using the current Coding Conventions.
¨ More MTS commands have been made into Command Language
Subsystems (CLS's).
¨ Named Address Spaces are used to load many components.
¨ The Online and Full filesaves now use labelled tapes.
¨ Tapes are now cataloged in an analogous way to files.
¨ HASP no longer needs separate disks for spooling; MTS
files can be used as spool files.
¨ The PDP (Paging Drum Processor) no longer needs separate
disks for paging; MTS files can be used as paging files.
¨ The *MESSAGES file format has changed to accomodate longer
message numbers.
0 Other system changes (not necessarily incompatible) are
described in the comments for the update files (...*Ux files).
Changes to the MTS Job Program assemblies are listed in the file
MTSS:MTSCHANGE*WX (42/10).
0 A number of initial MTS/6.0 systems are supplied in
different IPL files, so you must decide which is appropriate for
your site. See the writeup on the Resident System,
UMPS:RESSYS*WF (468/15), for descriptions of the following
1 2
-
available IPL files:
0 *IPL.MP (468/3)
*IPL.370 (468/4)
*IPL.4K (468/5)
*IPL.64 (468/6)
- The following discussion describes some basic steps to take
in order to save user files, bring up a MTS/6.0 system, and
restore the user files onto it. At installations where
substantial changes have been made to the MTS/5.1 system or
where it is not desired that all of this distribution be
installed at once, this procedure will have to be modified
accordingly. As this is a rather rough outline, please enlist
the help of one of the other MTS sites if you have questions or
concerns about the upgrade.
0 These first steps can be done while your production system
is still running.
0 1. Restore FILE:DASDI*OA (598/3) and FILE:DISKCOPY*OA (724/3)
to your current MTS system from the MTS/6.0 distribution
tapes (the MTS/5.1 versions of these programs might work,
but these programs have been upgraded in the 6.0
versions). You should consult the distribution driver
file index (461/30) for the locations of these components.
The index will indicate on which tape each is located and
what the file numbers are.
0 2. Use DASDI to initialize a VAMX disk pack as public volume
1 with a unique volume name; MTS601 might be a good
choice. See the General Notes (461/33) for instructions
on using DASDI. The following commands illustrate the
input to this program:
0 $Run File:Dasdi*oa+Copy:Sysdefs prot=off
Dxxx MTS601 VX 1 IPL SLOW
$ENDFILE
0 where "Dxxx" is the MTS device name of the disk to be
+ ____
initialized and "MTS601" is the volume name to be used for
+ ______
the disk pack.
0 3. Use DISKCOPY to restore the MTS/6.0 Starter System from
the three distributed dump/restore tapes. You should
specify the IPL option. You may wish to specify the SLOW
option to lessen the interference with your normal
operation. See the General Notes for information on
running DISKCOPY. The following commands illustrate the
input to this program:
0 $Run Diskcopy*oa+Copy:Sysdefs prot=off
TAPE
*1* *2* *3*
DISK
1 3
-
Dxxx MTS601
IPL SLOW
$ENDFILE
0 where *1*, *2*, *3* are the pseudodevice names associated
with the three mounted MTS/6.0 dump/restore tapes.
0 4. You will need a set of TABLES for your MTS/6.0 Starter
System. You can build these on your production system and
write them to tape where the Starter System will access
them in the next step. The TABLES macros (4/3) should be
used to construct the TABLES which will work for the
MTS/6.0 Starter System using the devices at your site.
You should consult the MTS/6.0 TABLES description (4/4)
for details.
0 Maintaining a set of TABLES using these macros is simpler
and much more reliable than using DECKGEN, so we do not
recommend using DECKGEN to build TABLES anymore. (In
fact, we have not continued to support it so it may not
even work.) Be sure to assemble your new TABLES using the
6.0 version of COPY:FILE*SAL (482/45) and
COPY:SECTIONS*SAL (4215), in addition to the new TABLES
macros. This version of TABLES should only contain one
MTS volume, MTS601, though it should contain information
on all disk devices. You may want to take a look at the
UM TABLES deck (4/1) or the default Starter System TABLES
(468/8) to see an example of the form of the TABLES
source. In fact, you should probably start with the
default tables as a basis for your TABLES, since it is
already set up for a one-pack system.
0 5. Using either a real or a VM guest virtual machine, IPL
from the MTS/6.0 Starter System pack and reply "NO" when
asked if you want the current system. This time enter the
commands:
0 LOAD NAME=*IPL.ttt
REPLACE TABLES.ttt FROM xxx
(Reply to the prompt for a printer address for a map)
0 where xxx is the address of a simulated tape corresponding
+ ___
to the object deck for your assembled TABLES and ttt is
+ ___
the suffix corresponding to the kind of machine
architecture you desire, such as "XA" or "370". Finally
enter
0 START
0 The MTS/6.0 Starter System should now be running. The
following steps should be done on the Starter System.
0 6. When system initialization finishes (when the message
"*NAL complete" appears), you should signon to the userid
MTS and $Run RAMROD (1019), create a new system from the
D6.0SYS.ttt system, and replace the deck TABLES.ttt in
1 4
-
that new system with the Starter System TABLES created in
step 4. Make this new system current so that you can IPL
on the Starter System easily in the future. Instructions
on running RAMROD can be found in the writeup in
RMRD:RAMROD*WF (1019/22).
0 7. Use this Starter System pack to get the new version of MTS
working to your satisfaction. This will require making
any local modifications to the resident system in the
RAMROD file in the Starter System. (Remember to change
RNBR.) The Starter System contains almost all of the
public and semi-public files, but not all of the utility
programs you may want. If additional programs are needed,
restore them from the MTS/6.0 distribution tapes using
*FS.
0 8. Add any local modules to *LIBRARY. Do not simply replace
the new *LIBRARY with your old one, but rather merge the
two.
0 9. Add any local messages to *SMDS. Again, do not just
replace the new file with your old one, as there may be
new messages in it. Generate a new object module from
*SMDS using the utility program (MTSS:GEN_SMDS*OG (197/3))
provided for this purpose and replace the DECK SMDSTBL
with the new version using RAMROD.
0 10. Add any local changes to *SYSMAC. Again, these must be
merged with the distributed version.
0 11. Change the MTS/6.0 SEG2:S2FILES (559/7) and SEG2:NASFILES1
through SEG2:NASFILES7 (891/17 - 891/24) files so that all
the components represented in your production system
SEG2:S2FILES (and SEG2:NASFILES, if you have that) are
accounted for.
0 12. Build a set of TABLES which will describe your MTS/6.0
production system. Remember that spooling and paging
packs are no longer necessary, so your TABLES must specify
which volumes the Spooling Extents and Paging Extents will
be on.
0 13. $Run MTS:RAMROD again, create a new system from the
current system and replace TABLES.ttt with the production
tables you just made. This is now the system you will
load when you come up on your production MTS/6.0 system.
Do not current this system, but use the Ramrod commands
+ __ ___
FREEZE, LOAD, and WRITE to write this system to *IPL.PROD.
0 Now that the basic MTS/6.0 system is ready, you will need
to do some special work on your production system in order to
finish up the merger. All users must be off the production
system for the following steps (except perhaps for the first
one).
0 14. Disable *PRINT* and *BATCH* on your production system and
1 5
-
empty the print and batch queues by printing/running all
the spooled jobs. This is necessary since the MTS/6.0
HASP is new and must be started anew. (Actually, this
step could be done with users still on the system; they
just couldn't use batch or printing facilities). All
batch jobs which are under a HOLDUNTIL restraint will have
to be cancelled and resubmitted by users on the MTS/6.0
system.
0 15. Save your current RSTR:FILEDIR.MAS file onto a *FS tape,
then empty RSTR:FILEDIR.MAS. Run a special version of the
Full Filesave on your production system that saves all
files - even those marked as NOSAVE. You can change the
current FileSave code to do this by changing the "if
Fd_No_File_Save" clauses in the routines Match_File and
Write_Save_Info which are in the file RSTR:FS_MAIN#SQ
(67/6). The empty RSTR:FILEDIR.MAS file will be filled
with the list of all the files saved.
0 16. In this step you will construct lists of files to be
restored later onto your production MTS/6.0 system.
0 i) Determine which files from the full filesave need to
be restored onto the MTS/6.0 system. Go through the new
RSTR:FILEDIR.MAS list and find all the user files,
licensed products, and files which are not distributed as
+ ___ ___
part of MTS/6.0 that you desire on your system. Make a
list of those files. Add to that list the files which are
site dependent such as *Messages, the Userdirectory
database, accounting files, statistic files, autostart
schedules, ckid lists, *Forum databases, etc. which you
will want your own versions of rather than the Starter
System versions of. (You might check for files in the
driver file with names of TSTP:? since those are Test
Pack/Starter System files.)
0 ii) Make a second list of files which you use in your
production system which are distributed as part of MTS/6.0
+ ___
but are not on the Starter System pack. (The list of
MTS/6.0 files already on the Starter System is in the file
DIST:MTS6.0.FILES (461/44).) This list will serve as input
to *FS to use in conjunction with the MTS/6.0 driver file
(461/27) to restore files from the MTS/6.0 distribution
tapes. Therefore, the list should be separated by
distribution tape and should be of the form
0 Restore (m) dist:6.0driver
Restore (m) (n) dist:6.0driver
0 where "(m)" is a file number and "(m) (n)" is a file
number range on one distribution tape of the files you
want and "dist:6.0driver" is the distributed driver file.
0 Save both of these lists on a *FS tape so they can be used
later on.
1 6
-
17. $Run *STA to save your statistics files to tape.
0 At this point you are ready to get rid of your MTS/5.1
production system. Your MTS/6.0 Starter System should be IPL'd
(if it isn't already up) before the following steps are taken.
0 18. Totally shutdown your production system.
0 19. You can optionally save a copy of your MTS/5.1 system by
copying all the production packs onto tape. Run DISKCOPY
from the Starter System to do this. If you only have a
few production packs, this shouldn't take too long and
might be worth the time (about 20 minutes per pack).
0 20. Run DASDI and reinitialize all of the production MTS
volumes. Make their labels the same as they were
previously. Remember that you do not have to initialize
any paging or spooling packs anymore.
0 21. Rebuild the production system catalog by using the CCATL
(Create Catalog) program (442). A description of how to
do this is in FILE:CCATL*WF (682/3). Be sure to use a
version of FILE:FILERTNS which describes the production
volumes.
0 22. The Starter System files now need to be "smeared" or
evenly distributed onto the production volumes. Use the
list of Starter System files given in DIST:MTS6.0.FILES
(461/44) and DIST:FMGEN*O* (461/43) to build a list of
files which FileMove (1020) will use to move the files
onto the multiple production volumes. You will need to
modify the list to specifically put the Paging and
Spooling files onto the volumes on which they must reside
(consistent with the designation in your production system
TABLES assembly). If you have specified more Spooling or
Paging extents in your production TABLES than exist on the
MTS/6.0 Starter System, you should modify the list to move
more of those extents. You must also be certain that the
file *IPL.PROD is moved to the file *IPL.0. You may want
to explicitly assign files to volumes in order to balance
the load.
0 23. Use FileMove to copy the files onto the production
volumes.
0 24. IPL your multi-volume MTS/6.0 system.
0 At this point your MTS/6.0 system is ready for the final
merger. You should not need the Starter System anymore. The
following steps are to be performed on the multi-pack MTS/6.0.
0 25. Signon to the MTS userid in order to restore files from
tape onto the multi-pack MTS/6.0 system.
0 i) $Run *FS and restore RSTR:Filedir.mas and the lists
of desired files made from the MTS/5.1 system.
1 7
-
ii) $Run *Restore and feed it the list of files (user
files, licensed products, site dependent databases, etc.)
which are not part of the MTS/6.0 distribution. You
should restore your *ACCOUNTINGn files to new names, such
+ _
as MTS:ACC1, MTS:ACC2, etc. so that they can be
reformatted (see below). Be sure to restore *Accounting,
*Project, and *Projdirectory.
0 iii) $Run *FS and restore the MTS/6.0 driver file to the
file DIST:6.0DRIVER. Mount each MTS/6.0 distribution tape
and $run *FS and feed it the list of files to be restored
from that tape. (This is the list or lists constructed in
step 16ii.)
0 26. Changes to the accounting records must be made. Restore
W013:ACONVERT*OG (104/112), ACC:ACCLIB (104/74), and
W013:LVLCNVRT*OG (104/52) from the MTS/6.0 distribution
tapes.
0 i) Convert existing accounting files to MTS/6.0 format.
You should do this from a userid which has write access to
the Accounting files, such as ACC.
0 $Run Aconvert*og+Acc:ACCLIB scards=MTS:ACC1
spunch=*ACCOUNTING1 sprint=*dummy*
...
$Run Aconvert*og+Acc:ACCLIB scards=MTS:ACCn
+ _
spunch=*ACCOUNTINGn sprint=*dummy*
+ _
0 ii) Make sure an empty *Accountingx (sic) file exists.
Use the following utility to initiate multi-level
accounting:
0 $Run Lvlcnvrt*og+Acc:ACCLIB
0 27. Nothing special needs to be done to accomodate the
statistic records format change. The MTS/6.0 programs and
utilities which use statistic records have been upgraded
to work with MTS/5.1 format (version 0) statistic records
through MTS/6.0 format (version 3) statistic records.
0 28. *Messages must be reformatted. Use the program in
MAIL:CONVERT*OQ(798/6) to do this. A description of how
to use it is in MAIL:CONVERT*WP (798/7).
1 8
-
The following is a list of public, semi-public, and major
private files on the test pack which have been added or changed
since the MTS/5.1 distribution. A word of caution is needed
here. The following list is based on the revision levels in the
driver file. While we have tried to set the revision levels
correctly for all components, doing this for a distribution is a
big job and we have certainly made some mistakes. Therefore the
following list will include some files that haven't changed and
some files that have changed will be omitted. We've tried to
make the first type of mistake more common then the second.
- *ACCINIT new *COMPARE changed
*ACCRESTORE changed *CSMP changed
*ADL changed *CSMPEXEC changed
*ANALYSIS changed *CSMPLIB changed
*ARC new *CSMPTRAN changed
*ASCEBCD changed *CTD changed
*ASMH changed *C87 new
*ASSIST changed *C87INCLUDE new
*AUTOREPLACE new *C87LIB new
*AUTOSTART changed *DDL changed
*BDL changed *DEDIT changed
*BLO changed *DLO changed
*BNCHRTN changed *DMP changed
*CBELL new *DSD new
*CBELLINCLUDE new *DUMPSYSPGNTS changed
*CBELLLIB new *EBCDASC changed
*CCMEMOS changed *EDL changed
*CCP changed *ELO changed
*CCPUBLICATIONS changed *FILESCAN changed
*CCQUEUE changed *FORTRANVS new
*CLB new *FS changed
*CLK changed *FSC changed
*CLN changed *FSM changed
*CLPARSEGEN changed *FSMCONVERT new
*CLPARSELIB changed *FTPSERV new
*CLR changed *GFINFODSECT changed
*CLSACC changed *HLG changed
*CLSEDIT changed *HPGLPLOT changed
*CLSFILEMENU changed *IF66 new
*CLSFSMESSAGE changed *IF77 new
*CLSHELP changed *IG changed
*CLSLIST changed *IG.SAVE changed
*CLSMESSAGESYS changed *IG.TX4113 changed
*CLSMOUNT changed *INIT changed
*CLSNET changed *I8080ASR changed
*CLSPMF changed *LABELS changed
*CLSSSTA changed *LBH new
*CMD changed *LBL changed
*CMDMACLIB changed *LIBRARY changed
*CMS changed *LINK11 changed
*CMSTAPELOAD new *LOCALPLOT changed
*CMSTAPESCAN new *LOCALPRINT changed
*CNFGINFODSECT changed *MACBINHEX new
*COLLATE new *MACPAINT4045 new
1 9
-
*MACRTNS changed *PTPRRTN changed
*MCS650XASR changed *PTS changed
*MDP changed *PWR changed
*MESSAGES.LOCK new *RATFOR changed
*MESSSUBS changed *REDUCE changed
*MGR new *RESTORE changed
*MGRSTAT new *RG changed
*MMS new *RIP changed
*MNETRTN.O changed *RM.MSG new
*MNS changed *RMS new
*MSG changed *RST changed
*MSGUTIL changed *SAV changed
*MUP changed *SCRIPTPTRFILE changed
*M6800ASR changed *SCRIPT1 changed
*M6809ASR changed *SDL changed
*NAL changed *SDLLIB changed
*NAL1 changed *SFSAVSUB changed
*NAL2 changed *SKEYSUB changed
*NAL3 changed *SLIDEQ new
*NAL4 changed *SNOSTORM changed
*NAL5 changed *SORT changed
*NAL6 changed *SORTLM changed
*NDL changed *SPITBOL changed
*NETCOPYMAC changed *SPITLIB changed
*NETMAILSCHEDULE changed *SPRIVSUB changed
*NETMAILSITES changed *SRK new
*NETSERVERS new *STA changed
*NEWCLSSSTA new *STATUS changed
*NLO changed *STE new
*OVERDRIVE changed *SYSMAC changed
*PASCALJBINCLUDE changed *S2P new
*PASCALJBLIB changed *TANGO new
*PASCALJBSYSLIB changed *TANGOLIB new
*PASCALTIDY changed *TAPERETRIEVE new
*PASCALVS changed *TAPERTN changed
*PASCALVSINCLUDE changed *TAPES new
*PASCALVSLIB changed *TAPESUBMIT new
*PASCALVSSYSLIB changed *TAXIR changed
*PDP11ASR changed *TCM new
*PDP8RTN changed *TEXTFORM changed
*PERSUB changed *TEXT360 changed
*PEXIT changed *TNR changed
*PGF changed *TOUCHSUB changed
*PIL changed *TPR new
*PLOTSEE changed *TPS changed
*PLOTSYS changed *TYPEQ changed
*PLUS changed *UDP new
*PLUS.ENDJUNK changed *UDROUTINES changed
*PLUS.OBJLIB changed *UNEDIT changed
*PLUS.SOURCELIB changed *UNIXTAR new
*PLUS68 new *UNLINKER changed
*PL1F changed *USERDIRECTORY changed
*PL1FLIB changed *UTILISP changed
*PL1LIB changed *VALIDATEFILE changed
*PL1TIDY changed *VMP new
*PROLOGW new *VSS changed
1 10
-
*VSSPDSBUILD changed BNCH:BN02 changed
*VSSPDSCOMPRESS changed BNCH:BN03 changed
*VSSPDSCONVERT changed BNCH:BN04 changed
*XEDIT new BNCH:BN05 changed
*XLISP new BNCH:BN06 changed
*Z80ASR changed BNCH:BN07 changed
*1052RTN changed BNCH:BN08 changed
*2501RTN changed BNCH:BN09 changed
*2741RTN changed BNCH:BN10 changed
*3270RTN changed BNCH:BN11 changed
*3284RTN changed BNCH:BN12 changed
ACC:ACCDISPLAY changed BNCH:BN13 changed
ACC:ACCDISPSHORT changed BNCH:BN15 changed
ACC:ACCFILCHARGE changed BNCH:BN16 changed
ACC:ACCLIB changed BNCH:BN17 changed
ACC:ACCMAINT changed BNCH:BN30 changed
ACC:ACCRETRIEVE changed BNCH:BN31 changed
ACC:ACCSAVE changed BNCH:BN32 changed
ACC:DISLEVEL changed BNCH:BN33 changed
ACC:FILEINFO changed BNCH:BN34 changed
ACC:LEVELMAINT changed BNCH:BN35 changed
ACC:PROJECTIDS new BNCH:BN36 changed
ACC:PROJECTMAINT changed BNCH:BN37 changed
APLI:MAKEFILE new BNCH:BN38 changed
APLI:MAKEFILE>SD new BNCH:BN39 changed
ARC.:ARC*O new BNCH:BN40 changed
ARC.:ARC*OE new BNCH:BN41 changed
ARC.:MAKE.UNIX new BNCH:BN42 changed
ARC.:MAKESIGFILE new BNCH:BN43 changed
+ _
ARC.:MAKEFILE new BNCH:BN44 changed
ASMH:ASMH*SAL new BNCH:BN50 changed
ASMH:ASMTIDY.MAKE new BNCH:BN51 changed
ASMH:CMDMACLIB new BNCH:CONSOLELOG new
+ _
ASMH:MAIN*OA changed BNCH:DRIVER changed
ASMH:MAKEFILE new BNCH:DSR*WF changed
BCC:MAKEFILE new BNCH:LISTFILES*OA changed
BNCH:ASSIGNVOL#SS changed BNCH:LISTFILES#SA changed
BNCH:BATCH.LOG new BNCH:MACROS changed
BNCH:BM00 changed BNCH:MIDAS3DATA new
+ __
BNCH:BM01 changed BNCH:MONITOR*WF changed
BNCH:BM04 changed BNCH:MTS.MACROS new
BNCH:BM05 changed BNCH:SEG2*OA changed
BNCH:BM06 changed BNCH:SEG2#SA changed
BNCH:BM08 changed BNCH:STATSUM*OA changed
BNCH:BM09 changed BNCH:STATSUM#SA changed
BNCH:BM11 changed BNCH:SUBMIT*OF changed
BNCH:BM12 changed BNCH:SUBMIT#SF changed
BNCH:BM13 changed BNCH:S2FILE new
BNCH:BM14 changed BNCH:TAXIR new
BNCH:BM18 changed CLIB:CBELL.MAKE new
BNCH:BM19 changed CLIB:MAKEFILE new
BNCH:BM20 changed CLS:MAKEFILE new
BNCH:BM21 changed CMS:MAKEFILE new
BNCH:BM23 changed COPY:CLP*SQL new
BNCH:BM26 changed COPY:DMGR*SAL changed
BNCH:BN01 changed COPY:DSP*SAL new
1 11
-
COPY:FECP*SAL new DMGR:MAKEFILE>SD new
COPY:FILE*SAL changed DSP:MAKEFILE new
COPY:FILE*SQL changed DSP:MAKEFILE>SD new
COPY:FILE*UQL changed DSR.:BNCH*UA changed
COPY:FILE#SQL changed DSR.:BNCH#SA changed
COPY:HOST*SQL new DSR:CMDMACLIB changed
COPY:INTERNET*SQL new DSR:MAKEFILE new
COPY:I8080*SAL changed DSR:SSRTNS.MAKE new
COPY:MCH*SAL changed DSR:3270.MAKE new
COPY:MCS650X*SAL new DUMP:DUMP.CMDS changed
COPY:MISC*SAL changed DUMP:DUMPER*OA changed
COPY:MNTR*SAL changed DUMP:MAKEFILE new
COPY:MNTR*SQL changed DUMP:SNARKLOG new
COPY:MTS*SAL changed DUMP:TASKDUMP new
COPY:MTS*SQL changed DWB:MAKEFILE new
COPY:M6809*SAL changed EDIT:CMDMACLIB changed
COPY:NETDATA*SQL new EDIT:MAKEFILE changed
COPY:RJE*SAL new EDIT:MAKEFILE#SD new
COPY:RJE*SQL new ETC.:$HELP*HFL changed
COPY:RMGR*SAL new ETC.:APC*H new
COPY:RMGR*SQL new ETC.:FORUM.LOG new
COPY:SECTIONS*SAL changed ETC.:FORUM*HFL changed
COPY:SL*SQL changed ETC.:FS*HF changed
COPY:STAT*SAL new ETC.:FSDISP*HFL changed
COPY:STOR*SAL new ETC.:FSHELPER*HFL changed
COPY:SUPER*SQL changed ETC.:FSMCONV*HC new
COPY:TABLES*SAL changed ETC.:FSMESSAGE*H new
COPY:TABLESXA*SAL new ETC.:FTP*HCL new
COPY:UC*SAL changed ETC.:KERMIT*HFL new
COPY:UMMPS*SAL changed ETC.:KERMIT*LOG new
COPY:UTIL*SAL changed ETC.:LOG.HELP changed
COPY:VM*SQL new ETC.:NET*H changed
COUN:GENDOC.DOCS changed ETC.:RESOLV.CONF new
COUN:GENDOC.DSTAT changed ETC.:RESTORE*HF new
COUN:GENDOC.GENS changed ETC.:TAPES*HCL new
COUN:GENDOC.NUMS changed ETC.:TAPESUB*HFL new
COUN:GENDOC.ONL.W changed ETC.:TAPESUBMIT new
COUN:GENDOC.OUTPT changed ETC.:UNIXTAR*HFL new
CREP:MAKEFILE new ETC:$ACCHELP changed
CREP:MAKEFILE>SD new ETC:AMDEREP6.0 new
CREP:SDL.MAKE new ETC:CNVTEREP changed
C87:MAKEFILE new ETC:CREPHELP*H changed
DIFF:APC.MAKE new ETC:C87ERRORLOG new
DIFF:COMPARE.MAKE new ETC:EREPCMDS changed
DIST:CMDMACLIB new ETC:EREPLIB changed
DIST:COMM changed ETC:FILEMENU*H changed
DIST:DRIVER changed ETC:FINGER*D new
DIST:FM.GEN changed ETC:IF.ELMQQSV changed
DIST:GENNOTES*WF changed ETC:LISTHELP*H changed
DIST:INDEX changed ETC:MACRO.H changed
DIST:INDEX.GENL changed ETC:ONELINER changed
DIST:MAKEFILE new ETC:PASVS*EXPL changed
DIST:MTS6.0.FILES changed ETC:PASVS*MESS changed
DIST:NEWSYS*WF changed ETC:PASVS*OPT changed
DIST:OLDSYS*WF changed ETC:PASVS*TRAN changed
DMGR:MAKEFILE changed ETC:PEEK*H changed
1 12
-
ETC:RDC3.FAPLIB changed FILE:DISK*WF changed
ETC:RDC3.IMAGE changed FILE:DISKCOPY*OA changed
ETC:RDC3.IMAGE.2 changed FILE:DISKCOPY*UA changed
ETC:RDC3.RLISP changed FILE:DISKCOPY#SA changed
ETC:RDC3.SLISP changed FILE:DSK*WF changed
ETC:RDC3.XMPLIB changed FILE:DSKMAN*UQ changed
ETC:RMPLOTALPHA new FILE:DSKMAN*UR new
ETC:RMQIF new FILE:DSKMAN#SQ changed
ETC:SDS*HFL changed FILE:DSKMAN#SR new
ETC:SNOSTORM changed FILE:FDMOD*OA changed
ETC:TAPEFREE new FILE:FDMOD*UA new
ETC:TAPELOGFILE new FILE:FDMOD#SA changed
ETC:TAPERETRIEVE new FILE:FILE*UCML new
ETC:TAXERRORS changed FILE:FILE#CML new
ETC:TXTFENVIR changed FILE:FILEMOVE*OQ new
ETC:TXTFFNS changed FILE:FILEMOVE*OR new
ETC:TXTFHYPHDICT changed FILE:FILEMOVE*UR new
ETC:TXTFLAYOUTS changed FILE:FILEMOVE#SR new
ETC:TXTFLOG changed FILE:FILERTNS changed
ETC:TXTFMSGS changed FILE:FINT*OL changed
ETC:TXTFNUCLEUS new FILE:FINT*UA changed
ETC:TXTFODS changed FILE:FINT*UQ changed
ETC:TXTFWIDS changed FILE:FINT#SA changed
ETC:UD.HELP changed FILE:FINT#SQ changed
FDEV:MAKEFILE changed FILE:FIXCAT*OA changed
FICS:MAKEFILE new FILE:FIXCAT*UA new
FILE:ACATLFAST*OA changed FILE:FIXCAT#SA changed
FILE:AMALCOMP*WF changed FILE:FIXEH*UA new
FILE:CATALOG*OA changed FILE:FIXEH#SA changed
FILE:CATLIST*O changed FILE:FIXSD*UA new
FILE:CATLIST*UQ changed FILE:FIXSD#SA changed
FILE:CATLIST#SQ changed FILE:FM*WF changed
FILE:CATSCAN*OQ new FILE:FSTEST*OA changed
FILE:CATSCAN*UA new FILE:FSTEST*UA changed
FILE:CATSCAN*WF changed FILE:FSTEST*WF changed
FILE:CATSCAN#SA changed FILE:FSTEST#SA changed
FILE:CATSCAN#SQ new FILE:GTUNIT changed
FILE:CCATL*OA changed FILE:MAKEFILE changed
FILE:CCATL*UA new FILE:OPEN*OA changed
FILE:CCATL*WF changed FILE:PM*WF changed
FILE:CCATL#SA changed FILE:PPCSET*OA changed
FILE:CHKFILE*OA changed FILE:PPCSET*UA new
FILE:CHKVTOC*OA changed FILE:PPCSET#SA changed
FILE:CHKVTOC*UA changed FILE:RECATALOG*UA new
FILE:CHKVTOC*WF changed FILE:RECATALOG#SA changed
FILE:CHKVTOC#SA changed FILE:STATAREA*OA changed
FILE:CHONID*OA changed FILE:STATAREA*UA new
FILE:CHONID*UA new FILE:STATAREA#SA changed
FILE:CHONID*WF changed FILE:STRPACK*WF changed
+ _
FILE:CHONID#SA changed FILE:TABLMOD*WF changed
FILE:CMDMACLIB changed FILE:TABLMODM*OA changed
FILE:DASDI*OA changed FILE:TABLRTN*OA changed
FILE:DASDI*UA changed FILE:TRAK*OA changed
FILE:DASDI*WF changed FILE:TRAKSTAT*OA changed
FILE:DASDI#SA changed FILE:TRAKSTAT#SA changed
FILE:DISASTER*WF changed FILE:TSTABLRTN*OA changed
1 13
-
FILE:VALIDATEF*UA changed HOST:MAKEFILE new
FILE:VALIDATEF*WF changed HOST:NSTEST new
FILE:VALIDATEF#SA changed HOST:NSTEST*HCL new
FILE:VAMREC*OA changed HOST:RESOLVER new
FILE:VAMREC*UA changed HOST:TCMCMD new
FILE:VAMREC*WF changed HOST:TLNTMNGR new
FILE:VAMREC#SA changed HOST:X25*SQL new
FILE:VNTD*WF changed IF66:CMDMACLIB new
FILE:VNTD#SA changed IF66:MAKEFILE new
FILE:VOLGET*OA changed IF77:CMDMACLIB new
FILE:VTOCUTIL*O changed IF77:MAKEFILE new
FILE:VTOCUTIL*UQ changed IG:DDR.MAK new
FILE:VTOCUTIL*UR changed IG:DI.MAK new
FILE:VTOCUTIL*WF changed IG:IAIG.MAK new
FILE:VTOCUTIL#SQ changed IG:MAKEFILE new
FILE:VTOCUTIL#SR changed INIT:ACCINITL new
FORT:FTNTIDY.MAKE new INIT:ACCINIT1 new
FORT:LOGIC.MAKE new INIT:ACCINIT2 new
FVS.:MAKEFILE new INIT:ACCINIT3 new
GDOC:GENDOC.DBPER changed INIT:ACCINIT4 new
GDOC:GENDOC.DOCS changed INIT:ACCINIT5 new
GDOC:GENDOC.DSCLO changed INIT:ACCINSCN new
GDOC:GENDOC.GENS changed INIT:AMDHIST new
GDOC:GENDOC.MPER changed INIT:CLEAN changed
GDOC:GENDOC.NUMS changed INIT:DATECHK changed
GDOC:GENDOC.ONL.W changed INIT:DATECHK.MAKE changed
GDOC:GENDOC.OUTPT changed INIT:IBMHIST new
HASP:CMDMACLIB new INIT:INITCHK changed
HASP:CONSOLE changed INIT:MAKEFILE changed
HASP:CONSOLE.D changed INIT:WWVCHK new
HASP:DA changed KERB:MAKEFILE new
HASP:DA.D changed LBT:ASA.MAKE new
HASP:DA*H changed LIB:STAFF changed
HASP:HASP.D changed LSPX:XLISP.MAKE new
HASP:HASP.D*SAL new MAC:MAKEFILE new
HASP:HASP.T changed MAIL:CMDMACLIB changed
HASP:HASP*SAL changed MAIL:EXPLAINFILE changed
HASP:HASPSTAT changed MAIL:MAKEFILE changed
HASP:HASPSTAT.D changed MAIL:MCLS.SKELS changed
HASP:MAKEFILE new MAIL:MESSAGEDUP changed
+ _
HASP:QUESCAN changed MAIL:MGR new
HASP:QUESCAN.D changed MAIL:MGRSTAT new
HELP:CMDMACLIB new MAIL:MMGR new
HELP:FSHELPER changed MAIL:MMGRSTAT new
HELP:MAKEFILE new MAIL:MSGUTIL*O changed
HELP:MAKEFILE>SD new MAIL:MSUB.SKELS changed
HOST:CMDMACLIB new MAIL:PURGE.LOG new
HOST:COPY*SQL new MCP:TRS13.DOC changed
HOST:DSPENV*SQL new MINI:GENASMUSELOG changed
HOST:ECHO new MINI:MAKEFILE new
HOST:ECHOSERV new MLDB:CMDMACLIB new
HOST:FTP*SQL new MM:MAKEFILE new
HOST:HIM*SQL new MM:SEHLMACLIB new
HOST:IO*OL new MNET:AUTH changed
HOST:IO*SQL new MNOP:CONSOLE(1,999) changed
HOST:IP.MAKE new MNOP:MACLIB changed
1 14
-
MNOP:11LOAD(1,999) changed PCP:ANMINOS changed
MNTR:DUMP*OA changed PFIO:HPGLPLOT.MAK changed
MNTR:ENVSW*OA changed PLOG:MAKEFILE new
MNTR:GETFREE*OA changed PLUS:CLP.MAKE changed
MNTR:MAKEFILE changed PLUS:CMDMACLIB changed
MNTR:MAKEFILE>SD new PLUS:CSL.MAKE new
MNTR:MNTR*OA changed PLUS:LIBGEN changed
MNTR:ONUNIT*OA changed PLUS:LIBGEN.MAKE new
MNTR:PRVI*OA changed PLUS:LIBLIST changed
MNTR:RESLCSPR*OQ new PLUS:MAKEFILE changed
MNTR:SERVICE*OA changed PLUS:MISC*OL changed
MNTR:SYNCWAIT*OA changed PLUS:MISC*SQL changed
MNTR:UCRTNTAB*OA changed PLUS:NEWCCENDJUNK changed
MNTR:UNITNODE*OA changed PLUS:OBJRTNS*OL changed
MNTR:WAIT*OA changed PLUS:OBJRTNS*SQL changed
MTA:CLEANMSG*O* changed PLUS:OBJ68AMI new
MTA:COPYMAC changed PLUS:OBJ68MDS new
MTA:DMGRSTAT.DIF new PLUS:OBJ68MPW new
MTS.:BROADCST new PLUS:PLUS*PTK changed
MTS:BUFSTAT*OA changed PL1:DWB*CML new
MTS:CKID.MAKE changed PL1:MAKEFILE new
MTS:CMDMACLIB changed PMF:MAKEFILE new
MTS:CONSOLE changed POST:CMDMACLIB changed
MTS:CREP changed POST:MAKEFILE changed
MTS:LISTSTAT changed POST:NMARCHIVE new
MTS:MAKERULES new POST:SCHEDULE changed
+ _
MTS:MAKERULESU new POST:SITEBUILD*O changed
+ _ _
MTS:MAKEFILE new PSEE:MAKEFILE new
MTS:MAKEMACLIB new PSYS:MAKEFILE new
MTS:MTS#CML changed RATF:MAKEFILE new
MTS:PRINTDUMP changed REPL:MAKEFILE new
MTS:TTTABLES#SA changed RMGR:CMDMACLIB new
MTSS:CMDMACLIB changed RMGR:INSTMAN*WP new
MTSS:MAKEFILE changed RMGR:MAKEFILE new
NASD:MAKEFILE changed RMGR:MAKEFILE>SD new
NET:CODE.MAKE new RMGR:MTSMSGLING new
NET:CODE*O new RMGR:OLG.MAKE new
OPER:CMDMACLIB new RMGR:OPR*WP new
PAGE:CCTDEFS#SD new RMGR:RFC82X*SQL new
+ _
PAGE:CCTBUILD new RMRD:MAKEFILE new
PAGE:CMDMACLIB changed RMRD:RAMROD*PF changed
PAGE:FNTCMDMAC changed RSTR:AUTOREST*OA changed
PAGE:FRMBUILD new RSTR:DEADSAVE*OA changed
PAGE:M.GR*DQL changed RSTR:FASTREST*OA changed
PAGE:M.PAGEPR*O changed RSTR:FASTRSTR*OA changed
PAGE:M.PAGEPR*SQL changed RSTR:FS*SAL changed
PAGE:MAKEFILE new RSTR:FSMAIN*OQ changed
+ _
PAGE:P.GR*DQL changed RSTR:FSRELAB*OA changed
PAGE:PAGEPR.LCS changed RSTR:FSTAPECOP*OA changed
PAGE:PAGEPR*O changed RSTR:LFSRESTAR*OA changed
PAGE:PAGEPR*SQL changed RSTR:LISTER*OA changed
PAGE:X97CMDMAC changed RSTR:MAKEFILE changed
PCP:AAMINOS changed RSTR:MERGE*OA changed
PCP:ABMINOS changed RSTR:OLFSTEST*OA changed
PCP:ADMINOS changed RSTR:ONLINEFS*OA changed
PCP:AEMINOS changed RSTR:REGENERAT*OA changed
1 15
-
RSTR:RST changed SEG2:LCSLCS new
+ _
RSTR:RSTFMT0*OA changed SEG2:LCSPRLCS new
+ _
RSTR:RSTMOUNT*OA changed SEG2:LOWSYM changed
RSTR:SCANFILE*OA changed SEG2:MACRTNS changed
RSTR:TAPEOUT changed SEG2:MESSSUBS changed
RSTR:TAPEOUT*OA changed SEG2:MESSSWS changed
RSTR:TAPEVIEW*OA changed SEG2:MM new
RSTR:TSNCMD changed SEG2:MM.TBLS new
RSTR:VTOCREAD*OA changed SEG2:MMGRSUBS new
SCP:SCPLOAD changed SEG2:MTACCTNG new
SCP:SCPTABLE changed SEG2:MTSSERV new
SDS.:MAKEFILE new SEG2:NALCMDMACLIB new
SEG2:ASMH.V2 changed SEG2:NALMAP changed
SEG2:CCTTABLE new SEG2:NALMAP changed
SEG2:CHECKANS new SEG2:NALMAP changed
SEG2:CLSCOPY changed SEG2:NASFILES.RM changed
SEG2:CLSCREATE changed SEG2:NASFILES1 changed
SEG2:CLSDESTROY changed SEG2:NASFILES2 changed
SEG2:CLSDISPLAY changed SEG2:NASFILES3 changed
SEG2:CLSDUMP changed SEG2:NASFILES4 changed
SEG2:CLSDUPLICATE changed SEG2:NASLOAD changed
SEG2:CLSEDIT changed SEG2:NASTRTNS new
SEG2:CLSEMPTY changed SEG2:NETENV new
SEG2:CLSFILEMENU changed SEG2:NEWCLSLOCKST changed
SEG2:CLSFILES changed SEG2:OBJUTIL changed
SEG2:CLSFSMESS changed SEG2:ONESHOT changed
SEG2:CLSFTP new SEG2:PAGEPR changed
SEG2:CLSHELP new SEG2:PASCALJB changed
SEG2:CLSINFO new SEG2:PASCALJBLIB changed
SEG2:CLSLIST changed SEG2:PASCALVS changed
SEG2:CLSLOG changed SEG2:PASCALVSLIB changed
SEG2:CLSMAKE changed SEG2:PERSUB changed
SEG2:CLSMESSAGESY changed SEG2:PIPEDSP new
SEG2:CLSMOUNT changed SEG2:PLUS changed
SEG2:CLSNET changed SEG2:PLUS68 new
SEG2:CLSPEEK changed SEG2:PL1FLIB changed
SEG2:CLSPERMIT changed SEG2:PRINTMAP*OA changed
SEG2:CLSRENAME changed SEG2:PRINTNMAP*OA new
SEG2:CLSSET changed SEG2:RMCLSSSTA new
SEG2:CLSTRUNCATE changed SEG2:RMGRLOAD new
SEG2:CMDSERV changed SEG2:RMOPR new
SEG2:CMS new SEG2:RMSRVLOAD new
SEG2:C87 new SEG2:SCREENRTNS changed
SEG2:DSPDSR new SEG2:SITEROUTINES changed
SEG2:DSPLOAD new SEG2:SYMLOAD new
SEG2:EDITSUB new SEG2:S2L changed
SEG2:FIX changed SEG2:TAPECATRTNS new
SEG2:FMTABLE new SEG2:TAPERTN new
SEG2:FNTRTN new SEG2:TIMERTNS changed
SEG2:FORUM changed SEG2:TLNTDSP new
SEG2:FRMTABLE new SEG2:TRMTYP new
SEG2:FSHELP changed SEG2:TRTABLES changed
SEG2:HIMDSPS new SEG2:UDROUTINES changed
SEG2:IF66 new SEG2:VIRTFILE changed
SEG2:IF77 new SEG2:VSF2COMP new
SEG2:IG changed SEG2:VSS new
1 16
-
SEG2:VSSCMS new TSTP:$PRJDIRECTOR new
SEG2:WTABLE new TSTP:$PROJECT new
SFIL:DEFINITIONS new TSTP:%ACCOUNTING new
SLID:MAKEFILE new TSTP:%ACCOUNTINGX new
STRT:MMS new TSTP:%ACCOUNTING1 new
STRT:MNS changed TSTP:%ACCOUNTING2 new
SYS:AMXEREP new TSTP:%ACCOUNTING3 new
SYS:AUTOHASP changed TSTP:%ACCOUNTING4 new
SYS:BADDEVS changed TSTP:%ACCOUNTING5 new
SYS:CCP changed TSTP:%PROJECT new
SYS:CCPINIT changed TSTP:CKID.ACCESS new
SYS:CHCHK changed TSTP:CKID.LOG new
SYS:CLOCKWATCHER changed TSTP:CKID.PURGE new
SYS:CMDTAPE changed TSTP:CKID.SIG new
SYS:DWBLOCK new TSTP:CLK.MASTER new
SYS:EREP.MAC new TSTP:CMDMACLIB new
SYS:FIXFEP changed TSTP:DCK new
SYS:HLOG changed TSTP:FORUM.MASTR1 new
SYS:HUH changed TSTP:FORUM.MASTR2 new
SYS:ITX changed TSTP:HSP changed
SYS:JSTCMD new TSTP:HS88010100 new
SYS:MSDM*OG changed TSTP:IPL.MP changed
SYS:MSSCN changed TSTP:IPL.370 changed
SYS:OLG new TSTP:IPL.4K changed
SYS:OLG*H new TSTP:IPL.64 changed
SYS:PIDENT changed TSTP:LAS changed
SYS:PLOTSTAT new TSTP:MAIL.FIREFIG new
SYS:PLT51 changed TSTP:MAKEFILE new
SYS:RMOPR new TSTP:MESSAGES changed
SYS:RMSCMD new TSTP:MESSAGES new
SYS:SDM changed TSTP:MMGR.LOCK new
SYS:STATSAV*OG changed TSTP:MMGR.LOG new
SYSU:CSTP2XA*OA new TSTP:NAL7 changed
SYSU:MAKEFILE new TSTP:NASFILES5 changed
SYSU:NAS.MAKE changed TSTP:NASFILES6 changed
SYSU:NASTEST changed TSTP:NASFILES6.UM changed
SYSU:PRMBLK new TSTP:NASFILES7 changed
SYSU:PRMBLK*OA new TSTP:NETLOG.BIT new
SYSU:SUMMPRT#SG changed TSTP:NETLOG.EXP new
TAPE:CROSS TSTP:NETLOG.IMP new
TSTP:RATEFILE changed
.#SQ new TSTP:REMOTE.DIR new
TAPE:MAKEFILE new TSTP:SITETABLE changed
TAPE:TPR.LOG new TSTP:SVWCMD changed
TAR:MAKEFILE new TSTP:S2FILES changed
TMTS:LOADMTS changed TSTP:S2FILES new
TMTS:POSTIPL changed TSTP:S2FILES new
TMTS:POSTIPL2 new TSTP:S2FILES.UM changed
TNGO:MAKEFILE new TSTP:S2FILES.UM new
TSTP:$ACCOUNTING new TSTP:S2FILES.UM new
TSTP:$ACCOUNTINGX new TSTP:S2L changed
TSTP:$ACCOUNTING1 new TSTP:TAPEMASTER new
TSTP:$ACCOUNTING2 new TSTP:TPTABXA#SA new
TSTP:$ACCOUNTING3 new TSTP:TPTAB370#SA new
TSTP:$ACCOUNTING4 new UD$.:MAKEFILE changed
TSTP:$ACCOUNTING5 new UD$.:UDMASDUPLOG new
+ _
1 17
-
UMPS:CLRPROF new
UMPS:CMDMACLIB new
UMPS:DBJP changed
UMPS:IPLGTUM*OA changed
UMPS:IPLINIT*OA changed
UMPS:IPLREAD*OA changed
UMPS:MAKEFILE new
UMPS:PDPBUG changed
UMPS:PISTLE*WF changed
UMPS:PRINTDUMPXA changed
UMPS:PRINTDUMP370 changed
UMPS:PRNTCNTS changed
UMPS:PTRACEXA*OA changed
UMPS:PTRACE370*OA changed
UMPS:RESSYS*WF changed
UMPS:SAVEPROF new
UMPS:SVC*PX changed
UMPS:UBTSTTAB*OA new
UMPS:UMLOAD*OA changed
UMPS:UMTABLES#SA changed
UMPS:UMTSTTAB*OA new
UNSP:COUNTW changed
UNSP:HASPLOG changed
UNSP:TAPEDRIVS*OA changed
UNSP:TESTIO changed
VMXA:MAKEFILE new
VMXA:VMCMD*OQ new
VMXA:VMP new
VMXA:VMPRINT new
WSCV:MAKEBINHEX new
WSCV:MAKEPAINT new
W013:MAKEFILE new
W030:CREBATEX changed
W030:MAKEFILE new
W030:PLOTSTAT new
W052:IEHMOVE.MAKE new
W052:MAKEFILE new
W062:LBLSNIFF.MAK new
W062:MACSCAN.MAKE new
W062:MACUTIL.MAKE new
W062:SRCHSORT.MAK new
W930:MAKEFILE changed
1 18
-
Many resident system object decks have been changed, renamed,
added, or deleted relative to the MTS/5.1 system. The following
is a list of all the decks in the MTS/6.0 XA Starter System (in
*IPL.MP) and an indication if they have been changed, renamed,
or added since MTS Distribution 5.1. MTS/5.1 decks which have
been deleted in the MTS/6.0 resident system are also indicated.
Decknames ending in ".XA" will be different in the 370 version
of MTS.
- ACCSUB new DSRS changed
ASTATSUB DSTYPE changed
BINEBCD DUMP.XA changed,renamed
BJPMOD changed DYS...................deleted
BLOKLETR changed E_ATTN new
BLSTDEV E_IO new
BROADCST changed E_QUIT new
BUFALLOC changed E_TIMER new
CACHTABL new ECORE new
CARDUC changed ENDSEG0 new
CAT changed ENDSEG2
CCDEFS changed EXIT changed
CCHSUBR...............deleted FAKE_DISK_MANAGER
CCSYMBOL changed FBJTJL changed
CCTB FBUILDPM new
CFDUB FEPI new
CHARGE................deleted FESNIFF changed
CHECKFE changed FIDCQ changed
CLOCKFIX new FLINE changed
CLOCKSET.XA new FNAMETRT..............deleted
CLPARSER new FNDJTL changed
CLPLCS new FSUB changed
CMDBXLE new GATE changed
CMDS changed GETD changed
CMDSTAT changed GETFINF changed
CONFIG.CARD.COMMENTS new GETRATES changed
CONFIG.CARD.MP change,renamed GUINFO new
CONFIG.MP changed,renamed GUINFTBL new
CONSIO.XA changed,renamed G11
CONSOLE.XA new ICOSTTAB changed
COST..................deleted IGFC60................deleted
CVTOMR IGFC70................deleted
DEVCTRL new IGFC80................deleted
DISTGATE.NCA changed IGF00470..............deleted
DJDE9700 changed IGF00580..............deleted
DMGR_DISKXF changed IGF01470..............deleted
DMGR_DISPATCH changed IGF01580..............deleted
DMGR_ENDJUNK new INFO..................deleted
DMGR_ITSKXF changed INITJE changed
DMGR_LOCK changed INTERPROC new
DMGR_MAIN changed INTERTSK.XA changed,renamed
DMGR_MISC changed ITBRDCST new
DMGR_MNTR changed ITGETMSG new
DMGRSTAT changed ITJOB changed
DSRDUMMY new ITNET new
DSRI changed JBRP changed
1 19
-
JMSGTDR new PUNUC changed
JOBDUMP P11
JOBLIST new QJOBENTR new
JOBLST.ENTRIES........deleted QJOBLIST new
JOBLST.HEAD...........deleted QN....................deleted
JOBLST.TAIL...........deleted RATEVEC changed
JOBS changed READ changed
JOBSTA changed REDL changed
JULGRG_RTNS RESLCSPR new
KWIC changed RMJOBLIST new
LDT.CARD RNBR changed
LLXU changed RSF changed
LOWCORE.DEFS.MP change,rename RWSE changed
MCHCCH.MP changed,renamed SDUMP changed
MCHCRW new SEGMENT.CARD
MCHSUBR...............deleted SEG0.NCA
MONITOR_DUMP new SEG0_HIGH_ADDRESS new
MONITOR_ENDJUNK new SEG0_LOW_ADDRESS new
MONITOR_ENVSW new SEG0.NCA.TABLES.......deleted
MONITOR_GETFREE change,rename SEG1.NCA
MONITOR_LCSPR new SEG1_HIGH_ADDRESS new
MONITOR_MNTR changed SEG1_LOW_ADDRESS new
MONITOR_MTSPGNTU new SEG1.NCA.TABLES.......deleted
MONITOR_ONUNIT change,renamed SIGNONM
MONITOR_PGNTUNIT new SMDSTBL changed
MONITOR_PRVI changed,renamed SOFTCHK
MONITOR_SERVICE changed SPELLCHK changed
MONITOR_SYNCWAIT new SSCN new
MONITOR_UCRTNTAB changed SSRTN.XA changed,renamed
MONITOR_UNITNODE change,rename STARTUP/SHUTDOWN changed
MONITOR_WAIT changed STATBUFF
MOVE STATJOB changed
MSG changed STATSUB changed
MTS changed STATSW changed
MTSBATCH new STDDMP changed
MTSCAT new STOPJOB changed
MTSINIT new STOR changed
MTSMACI new SYSDEFS.XA changed,renamed
MTSSTOR new TABLES.MP changed,renamed
MXFRTN TABLMOD changed
NASRTNS new TABLRTN changed
ONLINE/OFFLINE.XA change,renam TASKS changed
OPEN changed TASKSTAT changed
OPERATOR changed TBLS chnaged
PATH_DEVICE.XA change,renamed TIME new
PATRN new TIMECONV changed
PDP.DM changed,renamed TIMT..................deleted
PER.XA new TIMZONTB
PICTURE changed TN....................deleted
PLIM changed TPMOVE changed
PLUS_LINKAGE new TRAK changed
PLUS_RESLIB new TRTABLES_RES
PLUS_TIME new TR3270 changed
PN/QN/TN changed,renamed TTTABLES changed
PRINTLAW new T11
PTRUC UCDISK changed
1 20
-
UCTAPE changed
UCTVSYNC changed
UC3270 new
UC3284
UC3330 changed
UMLOAD changed
UMLOADTV
UMMPS.MP changed,renamed
UNITS.XA changed,renamed
USUB changed
UTIL new
VOLG changed
WRIT changed
XASCEBC new