

Installation instructions for Windows NT WnASPI32.DLL

Step 1: Click the cursor on the SETUP icon.  The Setup will install
NTASPI32.  (If another ASPI was previously installed, the Setup
software will not make any changes.)

Step 2:  After the setup program has finished, close down the OS,
turn off the computer, and install the host adapter firmly in the
PCI slot of your computer.

Step 3: Congratulations, you have finished installing your new
host adapter and Windows ASPI  32  (WNASPI32) in your Windows NT
system.  You now can restart the computer with the SCSI host adapter
fully installed.


