| @DDFF.ADF |
3.072 |
12.11.94 |
(02-26-93) This is the .ADF file for microchannel ESDI hard disk drive controller
cards. |
| 6VNOVELL.EXE |
32.286 |
12.11.94 |
(04-12-90) Timeout patches for Novell Netware. ATPTCH20.EXE and ATUTIL.EXE are to
be used with Novell ver 2.0.a. AT_PATCH.EXE is to be used with versions 2.10 and
2.11. These are patches to increase the timeout period of Data Request after a
write command. They need to be run before NETGEN is used. These patches are
needed for the Western Digital 1003V, 1006V, 1007V and "Intelligent" AT type
controllers on the market. Novell 2.1.2 and above does not require any patches.
The time out period was lengthened by Novell before this release. |
| EZDIAG.EXE |
48.656 |
24.03.97 |
(02-26-93) The utility is a safe, non-destructive way for you to verify the
configuration of your AT compatible computer, and to specifically test the hard
drive/controller subsystem. Upon loading the program, the low-order RAM pointer
bytes are presented to the screen. The machine's power-on self tests test
installed peripherals, and if valid ones exsist, the tables are updated. |
| LADDR.TXT |
5.120 |
12.11.94 |
(01-18-91) This is a companion text file for WD7000AX.BID file. |
| SDIAGP.EXE |
75.392 |
12.11.94 |
(02-26-93) The SDIAG software package can be used in conjunction with the WD
SCS-XTS or WD-SCS-ATXT to provide assistance to the system designers in
debugging and developing products. By combining two WD SCS-ATXT boards with the
SDIAG software the new designer may enhance his knowledge of the SCSI standard
ANSI x3.131 1986 and minimize the learning curve for SCSI protocol. |
| MC7FMTP.EXE |
51.840 |
12.11.94 |
(02-06-93) WDMCFMT is a general purpose low-level format program for microchannel
compatible ST-412/ST-506 hard disk controllers. This includes the WD1006V-MC1
and WD1006V-MCR. |
| WD7000AX.BID |
9.216 |
12.11.94 |
(01-23-91) This is a layered device driver and a companion for WDSCSI OS/2. LADDR
is compatible with OS/2 versions 1.21 and higher (including 1.3), and is added
as an installable driver to this version by the user. LADDR will be embedded in
OS/2 version 2.0 and higher. |
| WDC0002.EXE |
5.120 |
12.11.94 |
(02-26-93) This is a Enhanced ISA(EISA) automatic-configuring file for Western
Digital's WD1009V-SE2 controller card. |
| WDC0102.EXE |
4.096 |
12.11.94 |
(02-26-93) This is a Enhanced ISA(EISA) automatic-configuring file for Western
Digital's WD1009V-SE1 controller card. |
| WDMCFMTP.EXE |
39.552 |
12.11.94 |
Format\ST506-Microchannel Controllers (02-26-93) |
![[Home]](../../gifs/home.gif){kind=small}