S-800 FX Stackable
Fast Ethernet Repeater
"The first stackable Fast Ethernet Repeater for FX (Fiber Optic)
Fast Ethernet Environments"
-Up to nine network device attachments per repeater
-Supports 100 Mbits/sec. IEEE 802.3u 100BASE-FX standard on
Ports 1 through 8
-Supports 100 Mbits/sec. IEEE 802.3u 100BASE-TX standard on Port 9
-Combined with Cogent's EM100 FX adapter, makes networking with fiber
fast and affordable
-Scalable architecture allows stacking in groups of five; stackable
also with S-1200 TX Fast Ethernet Repeater
-Operates on 62.5/125 micron multimode fiber optic cabling; ST and SC models
available
-Two LEDs per port (Activity and Link/Partition); Power, Collision,
and Activity LEDs per unit
-Cabling distances up to 137 meters (445 feet); total network diameter
of 274 meters (890 feet)
-Supports all Ethernet and Fast Ethernet protocols and frame types
-19" rack mountable
-110/220 volt power supply
-Class I repeater, supports up to 57 devices in one unsegmented network
-Easily configurable MDI/MDI-X uplink port for flexibility
-Includes rack mount kit
-Available stacking kit
The S-800 FX is a low-profile, stackable, 9-port, Class I
802.3u Fast Ethernet repeater (hub) that integrates Fast
Ethernet into network segments that utilize multimode fiber
optic cabling. The S-800 FX can connect up to 9 separate
network devices, to build Fast Ethernet networks quickly and
cost-effectively. The ninth port provides an RJ-45
connection to 100BASE-TX, and two additional stacking ports
offer scalability for growing networks. The S-800 FX can be
stacked with the S-1200 TX Fast Ethernet repeater for CAT 5 UTP,
for mixed media topologies of limitless possibilities.
DISTANCE, SECURITY, FLEXIBILITY
The S-800 FX allows you to build Fast Ethernet segments
using data secure multimode fiber optic cabling. The ninth
port on the S-800 FX supports 100BASE-TX with an RJ-45 port.
The scalable architecture lets you stack up to five S-Series
repeaters, to create a single Fast Ethernet segment of up to
57 devices, with a combined diameter of up to 274 meters
(890 feet). The S-800 FX, stacked with the S-1200 TX
repeater, allows you to bridge between CAT 5 UTP
and Fiber Optic cable types. With models available for both
ST (twist-on) and SC (push-on) fiber optic connectors, the
S-800 FX operates in any Fast Ethernet environment, with
support for all Ethernet frame types and protocols.
THE RIGHT WAY TO REPEAT
The S-800 FX provides port level LEDs for Activity and
Link/Partition status (which identifies workstations
delivering malformed packets) and unit level LEDs for Power,
Collision and Activity, to keep you from guessing. A low-
profile, 19" rack mountable design makes the S-800 FX easy
to install and maintain. Power supply adjusts automatically
between 110 and 220 volts for worldwide use.
Expanding the possibilities - Cogent offers Ethernet
products to meet every adapter and repeater environment,
including 10BASE-2, 10BASE-T, 100BASE-T4, 100BASE-TX, and
100BASE-FX.
PRODUCT SPECIFICATIONS
DIMENSIONS AND WEIGHT
1.75" x 16.940" x 8.420" (6cm x 58.5cm x 29cm)
Unit weight: 5lb 6 oz (2.4 kilograms)
Shipping weight: 7lb 4 oz (3.3 kilograms)
INTERFACE CONNECTIONS
8 ST or SC fiber optic ports supporting 62.5/125 micron multimode
fiber optic cabling (100BASE-FX)
One RJ-45 port supports CAT 5 UTP and IBM Type 1 STP cabling (100BASE-TX)
2 50-pin stacking ports
STANDARDS COMPLIANCE
IEEE 802.3u 100BASE-FX
IEEE 802.3u 100BASE-TX (port 9)
IEEE 802.3u Class I repeater
UL, CSA, TUV
FCC Class A, CE Class A
DIAGNOSTIC LEDS
Per Unit:
Power (green, one per unit)
Collision (yellow, one per unit)
Activity (green, one per unit)
Per Port:
Activity (yellow, one per port)
Link/Partition (green/red, one per port)
RELIABILITY
Calculated MTBF>100,000 hours
POWER REQUIREMENTS
Power Supply: 100 to 240 VAC, 47 to 63 Hz
Internal Power Consumption: 50 watts
Heat Dissipation: 171 BTU per hour
ENVIRONMENTAL OPERATING RANGE
Temperature: 00C to 500C
Relative Humidity: 5% to 85% non-condensing
Altitude: 3000m maximum
MOUNTING AND STACKING
Includes hardware kit for mounting in a 19" rack
Available stacking kit
Stacks with all S-Series repeaters
WARRANTY
All Cogent repeater hubs are protected by a 5 year warranty
ORDERING INFORMATION
Order Number Description
S-800FX-ST Fiber Repeater ST connectors
S-800FX-SC Fiber Repeater SC connectors
STK-TX/FX Stacking Cable
Cogent Sales Cogent Corporate Cogent Europe
15375 SE 30th Place, Suite 310 640 Mullis Rosenstrasse 7
Bellevue, WA 98007 U.S.A. Friday Harbor, WA 98250 U.S.A. 80331 Munich Germany
Tel (206) 603-0333 Tel (360) 378-2929 Tel [49]89/231138-88
Fax (206) 603-9223 Fax (360) 378-2882 Fax [49]89/231138-11
Toll-free in U.S. 1-800-426-4368 http://www.cogentdata.com E-mail europe.sales@cogentdata.com
E-mail sales@cogentdata.com
Product specifications are subject to change without notice.
Cogent is a registered trademark and eMASTER+, Predictive Pipelining,
and Quartet are trademarks of Cogent Data Technologies, Inc. All other
trademarks are the property of their respective owners.