@DDFF.ADF ** 3 K ** (02-26-93)
  This is the .ADF file for microchannel ESDI hard disk drive controller
  cards.

6VNOVELL. EXE ** 32 K ** (04-12-90)
  Timeout patches for Novell Netware. ATPTCH20.EXE and ATUTIL.EXE are to
  be used with Novell ver 2.0.a. AT_PATCH.EXE is to be used with versions
  2.10 and 2.11. These are patches to increase the timeout period of Data
  Request after a write command. They need to be run before NETGEN is used.
  These patches are needed for the Western Digital 1003V, 1006V, 1007V and
  "Intelligent" AT type controllers on the market. Novell 2.1.2 and above
  does not require any patches. The time out period was lengthened by
  Novell before this release. 

EZDIAG.EXE ** 68 K ** (02-26-93)
  The utility is a safe, non-destructive way for you to verify the
  configuration of your AT compatible computer, and to specifically test
  the hard drive/controller subsystem. Upon loading the program, the
  low-order RAM pointer bytes are presented to the screen. The machine's
  power-on self tests test installed peripherals, and if valid ones
  exsist, the tables are updated.

LADDR.TXT ** 5 K ** (01-18- 91)
  This is a companion text file for WD7000AX.BID file.

SDIAGP.EXE ** 75 K ** (02-26-93)
  The SDIAG software package can be used in conjunction with the WD
  SCS-XTS or WD-SCS-ATXT to provide assistance to the system designers
  in debugging and developing products. By combining two WD SCS-ATXT
  boards with the SDIAG software the new designer may enhance his
  knowledge of the SCSI standard ANSI x3.131 1986 and minimize the
  learning curve for SCSI protocol.

MC7FMTP .EXE ** 52 K ** (02-06-93)
  WDMCFMT is a general purpose low-level format program for microchannel
  compatible ST-412/ST-506 hard disk controllers. This includes the
  WD1006V-MC1 and WD1006V-MCR.

WD7000AX.BID ** 9K ** (01-23-91)
  This is a layered device driver and a companion for WDSCSI OS/2. LADDR
  is compatible with OS/2 versions 1.21 and higher (including 1.3), and
  is added as an installable driver to this version by the user. LADDR
  will be embedded in OS/2 version 2.0 and higher.

WDC0002.EXE ** 5 K ** (02-26-93)
  This is a Enhanced ISA(EISA) automatic-configuring file for Western
  Digital's WD1009V-SE2 controller card.

WDC0102.EXE ** 4 K ** (02-26-93)
  This is a Enhanced ISA(EISA) automatic-configuring file for Western
  Digital's WD1009V-SE1 controller card.