TITLE: NVIDIA Detonator FX Driver VERSION: 44.78 Rev. A DESCRIPTION: This package contains the Windows 2000 and Windows XP driver for NVIDIA graphics in the workstation models listed below. PURPOSE: Recommended Update SOFTPAQ NUMBER: sp25488 SUPERSEDES: sp25275, sp24777, sp24245, sp23796, sp21497, sp18250 EFFECTIVE DATE: October 3, 2003 CATEGORY: Driver - Graphics - Nvidia SSM SUPPORTED: Yes PRODUCT TYPE(S) Workstations PRODUCT MODEL(S) Evo Workstation W4000 CMT: All Models Evo Workstation W4000 SFF: All Models Evo Workstation W6000: All Models Evo Workstation W8000: All Models HP Workstation x1100: All Models HP Workstation x2000: All Models HP Workstation x2100: All Models HP Workstation x4000: All Models HP Workstation xw3100: All Models HP Workstation xw4000: All Models HP Workstation xw4100: All Models HP Workstation xw5000: All Models HP Workstation xw6000: All Models HP Workstation xw8000: All Models OPERATING SYSTEM(S): Windows 2000 Windows XP Professional LANGUAGE(S): Global FIXES: Fixes the following issues: - Unigraphics 18.05.02 and NX 1.02.3 continuous model rotation uses memory - When I-DEAS 9 FX 3000 is used with Windows 2000, computer locks up at start-up - Nissan SpaceVision 980 XGL and Windows 2000 application error - Division Mockup 980 XGL and Windows 2000 application error - GDI/2D stress NVS and Windows 2000 causes monitor to go black or display problems - OpenGL demos 900 and 750 XGL and Windows 2000 lose object after full-screen DOS mode switch - CoCreate OneSpace Designer FX 2000 and Windows 2000 cannot load large data set - Hyper-thread Windows Media Player display flashes and turns gray - CATIA NVIDIA driver setting application private environment variables - Unigraphics 18.05.02 display problems in drafting mode - I-DEAS 10 system error in process nbb.exe after large memory allocation - Hibernation NVS 400 locks up entering or resuming from Standby - Pro/ENGINEER Wildfire 980 XGL system lockup - Quadro NVS warning in Device Manager after Standby and restart - NVS 400 loses sync on DOS mode switch with L2025 display PREREQUISITES: N/A HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions. Copyright (c) 2003 Hewlett-Packard Development Company, L.P.