SOFTPAQ NUMBER:  SP29054
PART NUMBER:  375387-003
FILE NAM:  N/A
TITLE:  Options ROMPaq Firmware Upgrade Diskette for the Hewlett-Packard
        Integrated Lights-Out Management Controller.

VERSION:  1.75
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Systems

PRODUCTS AFFECTED:      ProLiant BL20p
			ProLiant BL20p G2
			ProLiant BL20p G3
			ProLiant BL25p
			ProLiant BL30p	
			ProLiant BL35p
			ProLiant BL40p
			ProLiant ML350 G4p
                        ProLiant ML370 G3
			ProLiant ML370 G4
			ProLiant ML570 G3
			ProLiant DL320 G3
                        ProLiant DL360 G2, G3, G4, G4p
			ProLiant DL380 G3
			ProLiant DL380 G4
			ProLiant DL385
			ProLiant DL560
		        ProLiant DL580 G2, G3
			ProLiant DL585
			ProLiant DL740

OPERATING SYSTEM:  Microsoft Windows 2000, Microsoft Windows Server 2003, 
Microsoft Windows NT 4.0, Red Hat Enterprise Linux 4 (x86 & AMD64/EM64T), 
Red Hat Enterprise Linux 3 (x86 & AMD64/EM64T), Red Hat Enterprise 2.1, 
United Linux 1.0/SUSE LINUX Enterprise Server 8, SUSE LINUX Enterprise 
Server 9 (x86 & AMD64/EM64T), Novell Netware 6.5, Novell Netware 5.1

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

EFFECTIVE DATE:  April 1, 2005

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 2.X

SUPERSEDES: SP19817 (1.06), SP19846 (1.15), SP21861 (1.16), SP21863 (1.20), 
SP21888 (1.25), SP21938 (1.26), SP21992 (1.27), SP21940 (1.40), SP24873 (1.41),
SP24931 (1.42), SP24920 (1.50), SP25739 (1.51), SP25040 (1.55), SP25781 (1.60), 
SP26183 (1.62), SP26185 (1.64), SP26196 (1.70)



DESCRIPTION:   This release provides updated firmware for the latest
               maintenance releases of the Hewlett-Packard Integrated
               Lights-Out Management Controller.  This Softpaq is used
               for remote iLO firmware update via the iLO web-based 
               interface, iLO CLP interface or the iLO XML scripting process.  

New features -

1. Added option to enable High Performance Mouse within the remote console.  
The High Performance Mouse improves mouse response and synchronization and is  
supported on ProLiant servers running Microsoft Windows 2003 or Windows 2000 
Service Pack 3 or later.

For the best performance, run the HP Online Configuration Utility for
Windows 2003/2000 with the /mouse option to optimize the server mouse settings
and use the remote console (not dual cursor).

Note: Disable High Performance Mouse support to use remote console during a 
SmartStart assisted operating system installation.

The High Performance Mouse option can be enabled or disabled via XML scripting 
using the following command.

<RIBCL VERSION="2.0">
 <LOGIN USER_LOGIN="adminname" PASSWORD="password">
   <RIB_INFO MODE="write">
     <MOD_GLOBAL_SETTINGS>
       <HIGH_PERFORMANCE_MOUSE VALUE="Yes" /> 
     </MOD_GLOBAL_SETTINGS>
   </RIB_INFO>
  </LOGIN>
 </RIBCL>

2. Support for Firefox 1.0 browser running from Red Hat Enterprise Linux Workstation
   3.0 or Novell Linux Desktop.

   Note:  Firefox is very strict when handling website certificates.  When using
   iLO's default self-signed certificate, do not choose "Accept this certificate
   permanently" on the certificate dialog box.


Problems fixed from last release -

1.  Updated the iLO Power Regulator feature on ProLiant servers with Intel XEON  
    processors with EM64T technology to correct the problem where the setting 
    will not work until the option is initially set through RBSU.

2.  Correctly disable options on iLO Power Regulator web page on servers that do not
    Support Dynamic Power Regulation.

3.  Corrected operation of the oemhp_rcport & oemhp_vmport.  Previously, the
    oemhp_rcport was setting the vmport and vice versa.


Documentation -

1.  Use the HP Integrated Lights-Out 1.70 User Guide and HP Integrated 
Lights-Out 1.70 Scripting and Command Line Resource Guide for information about this
release.  These documents can be found by following the link at: 
http://h18013.www1.hp.com/products/servers/management/ilo/documentation.html
Select manuals under self help resources for a list of product documentation.

2. Check the online help files for additional information about how to use features.
    Online help files can be accessed from within the browser web pages by clicking
    on the question mark in the upper right-hand corner of each page.

HOW TO USE:

1.  Obtain two formatted 1.44 MB diskettes.

2.  Download the SoftPaq to a directory on your hard drive and change to
    that directory.  The file that is downloaded is SP29054.EXE.

3.  From that drive and directory, execute the SoftPaq file:

SP29054 [ENTER]

You will be prompted to place each formatted 1.44 MB diskette into a diskette
drive to create the diskettes.  Be sure and note the first and second diskettes.

4.  After the diskettes are created, you may delete the downloaded file
    SP29054.EXE if you wish.

5.  Insert the first diskette in drive A: and cold boot the system.  The system will prompt
    you when the second diskette should be inserted.
    
Copyright 2005 Hewlett-Packard Development Company, L.P.

Hewlett-Packard and the Hewlett-Packard logo are trademarks of Hewlett-Packard
Development Company, L.P/ in the U.S. and/or other countries.