TITLE: Intel Application Accelerator (IAA) SATA RAID Driver/Application

VERSION: 4.5.1.6809 Rev. A
DESCRIPTION:
This package contains the Intel Application Accelerator (IAA) Serial ATA (SATA) 
RAID Driver and Application for the listed workstation models and operating 
systems.
PURPOSE: Recommended
SOFTPAQ NUMBER: SP29489
SUPERSEDES: SP28501
EFFECTIVE DATE: December 16, 2004
CATEGORY: Driver - Storage
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

PRODUCT MODEL(S):
HP Workstation xw4200: All Models
HP Workstation xw6200: All Models
HP Workstation xw8200: All Models

OPERATING SYSTEM(S): 
Windows 2000
Windows XP Professional

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

FIXES: 
- Fixes issue on HP Workstation xw6200 and HP Workstation xw8200 that may occur 
when resuming from Sleep mode (S4).

PREREQUISITES: 
N/A

HOW TO USE: 
1. Download the SoftPaq .EXE file to a directory on your hard drive.

2. Execute the downloaded file and follow the on-screen instructions. The 
self-extracting file stores the drivers in the C:\SWSETUP\IAA_4.5.1.6809 
directory.


FOR OPERATING SYSTEM SATA RAID ARRAY IMAGE:
Install the driver using the F6 Installation function when installing Microsoft 
Windows or build a pre-installation image with the driver.

The drivers can be extracted from the iata_enu.exe file. To extract the drivers 
for use with the F6 Installation function, or to build into a pre-installation 
image, execute the following command in a DOS shell:
c:\iata_enu.exe -a -a -p c:\

The preceding command extracts the following files to the path location 
specified in the command:
- iaAHCI.cat (8 KB)
- iaAHCI.inf (3 KB)
- iaStor.cat (8 KB)
- iaStor.inf (4 KB)
- iaStor.sys (467 KB)
- TXTSETUP.OEM (3 KB)


FOR A DATA SATA RAID ARRAY IMAGE:
1. Install the driver and application after you have the operating system on a 
different hard drive.

2. Install two SATA hard drives to the onboard SATA ports and enable the SATA 
RAID option ROM in the systems BIOS setup prior to booting to Windows.

3. Execute the following command from C:\SWSETUP\IAA_4.5.1.6809:
iata_enu.exe

The preceding command installs the IAA 4.5.1.6809 driver and the IAA 
application that configures and controls the SATA RAID arrays.

NOTE: If the option ROM is not enabled, the following error message is 
displayed:
''This hardware is incompatible'' 



Copyright (c) 2004 Hewlett-Packard Development Company, L.P.