|
TITLE: |
HP WLAN W400/W500 Driver |
|
VERSION: |
4.00 REV: B |
|
DESCRIPTION: |
This package contains the Microsoft Windows 2000 and Microsoft Windows XP driver for the HP WLAN W400-W500 Adapter in the listed notebook models. |
|
PURPOSE: |
Routine |
|
SOFTPAQ NUMBER: |
SP32579 |
|
SUPERSEDES: |
SP30101 |
|
EFFECTIVE DATE: |
May 10, 2006 |
|
CATEGORY: |
Driver - Network |
|
SSM SUPPORTED: |
YES |
|
PRODUCT TYPE(S): |
Notebooks |
|
PRODUCT MODEL(S): |
Compaq Presario R3000 Notebook PCSeries Compaq Presario R3200 Notebook PCSeries Compaq Presario v1000 Notebook PCSeries Compaq Presario V1000 Notebook PCSeries Compaq Presario V4000 Notebook PCSeries Compaq Presario X1400 Notebook PCSeries Compaq Presario X4000 Notebook PCSeries HP Compaq nc4000 Notebook PC HP Compaq nc4010 Notebook PC HP Compaq nc6000 Notebook PC HP Compaq nc8000 Notebook PC HP Compaq nw8000 Mobile Workstation HP Compaq nx5000 Notebook PC HP Compaq nx9100 Notebook PC HP Compaq nx9105 Notebook PC HP Pavilion dv4000 Notebook PC Series HP Pavilion dx4000 Notebook PC Series HP Pavilion zt3300 Notebook PC Series HP Pavilion zv5000 Notebook PC Series HP Pavilion zv5200 Notebook PC Series DEVICES SUPPORTED: HP WLAN 802.11b/g W400 HP WLAN 802.11a/b/g W500 |
|
OPERATING SYSTEM(S): |
Microsoft Windows 2000 Microsoft Windows XP Home Edition Microsoft Windows XP Professional |
|
LANGUAGE(S): |
Chinese (Prc. Simplified) French German Italian Japanese Korean Spanish Taiwan Chinese (Traditional) US English ENHANCEMENTS: - Provides Atheros driver version 4.1.2.111. - Adds application program interface (API) that enables queries to Quality of Service (QOS) Support. - Adds support for 802.11h. |
|
FIXES: |
- Fixes issue with IP Communicator that occurs when running Atheros Driver version 4.0.100.140a, where the IP Communicator stops responding (crashes) when placing or receiving phone calls over wireless connections. - Fixes issue where power settings do not work properly. - Fixes issue where the system stops responding (halts) when an attempt is made to associate to dynamic turbo access points (APs) when in static turbo channels. - Fixes issue with OID_802_11_BSSID_LIST enabling it to return information elements for Cisco Compatible Extentions (CCX). - Fixes NonMaskable Interrupt (NMI) parity error that causes systems with the ICH6 chipset to stop responding (halt). - Fixes issue where Signal Quality is always shown as one percent (1%) while in Turbo mode. - Fixes issue where Access Point (AP) startup fails when data rate is set to 5.5 Mbps using the web server rather than the command line interface (CLI). - Fixes issue where the system stops responding (freezes) when using Microsoft Wireless Zero Configuration and performing a hardware disable or enable of the radio. - Fixes issue where a connection cannot be made when both WPA-PSK and Super Mode are enabled. - Fixes issue where the system stops responding (hangs) during a reboot under battery power due to attempts to access hardware that is in Sleep state. |
|
PREREQUISITES: |
None |
|
HOW TO USE: |
1. Download the SoftPaq .EXE file to a directory on your hard drive. 2. Execute the downloaded file and follow the on-screen instructions. NOTE: After the files are unpacked, the Setup program runs automatically. If the setup program (Setup.exe) needs to be run manually, look for it in the download directory. Copyright (c) 2006 Hewlett-Packard Development Company, L.P. |