TITLE: LSI Logic 3041E SAS RAID BIOS Utility

VERSION: 1.06 Rev. A
DESCRIPTION:
This package contains the LSI Logic 3041E Serial Attached SCSI (SAS) RAID BIOS 
utility for the listed workstation models, operating systems, and supported 
host bus adapters. 

This BIOS supports RAID Integrated Stripping (IS), which equates to RAID 0; 
RAID Integrated Mirroring (IM), which equates to RAID 1; and RAID Integrated 
Mirroring Extended (IME), which is also known as RAID 1e. 

PURPOSE: Routine
SOFTPAQ NUMBER: SP33397
SUPERSEDES: None
EFFECTIVE DATE: July 24, 2006
CATEGORY: Utility - Tools
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

HARDWARE PRODUCT MODEL(S):
HP xw4400 Workstation: All Models
HP xw6400 Workstation: All Models
HP xw8200 Workstation: All Models

SOFTWARE PRODUCT(S):
None

OPERATING SYSTEM(S): 
Microsoft Windows XP Professional
Microsoft Windows XP Professional x64 Edition

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

PREREQUISITES: 
N/A

INSTALLATION INSTRUCTIONS: 
To create a bootable HP USB Flash Disk that can be used for the LSI Logic 3041E 
SAS RAID Firmware and BIOS Utility, complete the following steps: 

1. Download the SoftPaq file and extract the package contents to a known 
location on your hard drive.
Example: C:\swsetup\sp33397

2. Click Start, then click Run, and then type CMD in the Open box to open a 
Command window.

3. Navigate to the directory where the SoftPaq files were extracted.
Example: cd c:\swsetup\spx33397

4. Insert the USB flash drive (drive key) that you want to use to create the 
bootable media and make a note of the drive letter that is assigned to it by 
Microsoft Windows.

WARNING: Step 5 overwrites any existing data on the specified drive letter.

5. Create the bootable USB flash drive (drive key) by typing the following 
command:
mkusb :

6. Close the Command window.

7. Use the Microsoft Windows "Safely Remove Hardware" utility in the system 
tray to remove the USB Flash Drive from the computer. Using this utility 
ensures that 
the drive is synchronized before removal.

8. Boot the HP Personal Workstation to the USB Flash Drive (drive key) that was 
created in Steps 1 through 7 to use the LSI Logic 3041E SAS RAID Firmware and 
BIOS Utility.

9. At the DOS prompt type `fls_sas.bat`. The updated script is executed and the 
new BIOS is installed.

NOTE: Files that are extracted in Step 1 are as follows:
- Readme.txt
- freedos\command.com
- freedos\kernel.sys
- freedos\freedos_source.zip
- fls_sata.bat
- 3041V106.fw
- DOS4GW.EXE
- mptsas.rom
- mptutil.exe
- read.exe 
- sed.exe


Copyright (c) 2006 Hewlett-Packard Development Company, L.P.