TITLE: ADI AC97 Integrated Digital Audio Driver

VERSION: 5.12.1.4070 Rev. F
DESCRIPTION:
This package contains the audio driver for the ADI AC97 Integrated Digital 
Audio Controller in the listed desktop models and operating systems.

NOTE: For Linux support, visit the Alsa website at http://www.alsa-project.org/ 
for the latest supported drivers. 

PURPOSE: Recommended
SOFTPAQ NUMBER: SP34226
SUPERSEDES: SP27989
EFFECTIVE DATE: March 27, 2006
CATEGORY: Driver - Audio
SSM SUPPORTED: Yes

PRODUCT TYPE(S):
Desktops

HARDWARE PRODUCT MODEL(S):
HP Compaq dc5100 microtower: All Models
HP Compaq dc5100 small form factor: All Models
HP Compaq dc7100 convertible minitower: All Models
HP Compaq dc7100 small form factor: All Models
HP Compaq dc7100 ultra-slim desktop: All Models
HP Compaq dx2100 Slim Tower  PC: All Models
HP Compaq dx6100 microtower: All Models
HP Compaq dx6100 slim tower: All Models
HP Compaq dx6120 microtower: All Models
HP Compaq dx6120 slim tower: All Models
HP Compaq dx6128 microtower: All Models

SOFTWARE PRODUCT(S):
None

DEVICES SUPPORTED:
(uATX)HP Compaq dx6100 MT/ST AC97 Integrated Digital Audio
HP Compaq dc7100 SFF AC97 Integrated Digital Audio
HP Compaq dc7100 USDT AC97 Integrated Digital Audio
HP Compaq dx61xx microtower
HP Compaq dx61xx Slim tower
reserved

OPERATING SYSTEM(S): 
Microsoft Windows 2000
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

FIXES: 
- Resolves intermittent issue where the system stops responding (hangs) when 
resuming from Standby mode with an active network connection. The issue was 
resolved by increasing suspend latency.

PREREQUISITES: 
- DirectX 6 (or higher) should be installed prior to installation of audio 
drivers from this SoftPaq.
- If you use System Software Manager (SSM), you must be using version 1.50 (or 
later). For more information about SSM and to obtain the latest version of SSM, 
please use the following URL:
http:\\www.hp.com\go\ssm

INSTALLATION INSTRUCTIONS: 
1. Download the SoftPaq .EXE file to a directory on your hard drive.

2. Execute the downloaded file and follow the on-screen instructions.

NOTE: After the files have been unpacked, the self-extracting file downloaded 
in Step 1 can be deleted, if desired.

3. To install: Execute the setup.exe file unpacked in Step 2. The default 
location is C:\SWSetup\SP34226, unless otherwise modified during Step 2.

NOTE: After the installation is complete, the directory created in Step 2 can 
be deleted, if desired.


Copyright (c) 2004-2006 Hewlett-Packard Development Company, L.P