|
TITLE: |
HP iPAQ rw6815 Personal Messenger Series ROM Update |
|
VERSION: |
1.12.00 |
|
DESCRIPTION: |
This package contains the ROM Update Utility (RUU) and ROM image for the supported HP iPAQ Personal Messenger models and operating systems. CAUTION: This update may not be compatible with the Microsoft Windows Vista Operating System and could cause device failure if the host computer for the update is running a Microsoft Windows Vista Operating System. Please check the release notes (Readme file) of this SoftPaq before flashing your device! IMPORTANT: The RUU is designed to replace the current ROM image and to erase the partnership and all user data and programs on the HP iPAQ Personal Messenger. It is important to read and understand the information in the Readme file that is included with this update BEFORE installing this package. |
|
PURPOSE: |
Recommended |
|
SOFTPAQ NUMBER: |
sp35814 |
|
SUPERSEDES: |
None |
|
EFFECTIVE DATE: |
30 August 2007 |
|
CATEGORY: |
BIOS |
|
SSM SUPPORTED: |
No |
|
PRODUCT TYPE(S): |
Handhelds |
|
HARDWARE PRODUCT MODEL(S): |
HP iPAQ rw6815 Personal Messenger Series |
|
OPERATING SYSTEM(S): |
Microsoft Windows Mobile 5.0 |
|
LANGUAGE(S): |
Danish |
|
ENHANCEMENTS: |
- Adds HPCertificateEnroller 4.00.012 in the ROM. - Enables the iPAQ Personal Messenger to be powered on with the AC cable plugged in, even if the battery is 0% charged. - Adds function in the Auto Configurator application that asks the user to select the network setting, even for different SIMs that have same MCC/MNC. - Updates the operator network setting. - Defaults the network selection mode to automatic after reset. - Improves echo cancellation by fine tunning the audio parameter with the earpiece. - Increases the priority of SMS tasks to give them a higher priority than Phone book tasks in order to ensure that SMS is able to be used right after power on. - Enables the number of times a network search request is attempted to be set by the network. |
|
FIXES: |
- Fixes issue where USSD commands do not work. - Fixes issue where a faint buzzing sound is heard on the iPAQ Personal Messenger when the headset is plugged in. - Fixes issue where dial-out ring quality is worse when switching dial-out ring path from Bluetooth headset to a wired headset. - Fixes issue where recording during an ongoing phone call fails while changing the phone call path from the Bluetooth headset to a wired headset. - Fixes issue where iPAQSetWLANRadio(1) does not turn on the WLAN Radio and iPAQGetWLANRadioStatus() also does not work. - Fixes issue where the user switches to a Bluetooth headset, but the title bar still displays the loudspeaker icon. - Fixes issue where auto Configurator does not differentiate between networks with same MCC/MNC. - Fixes issue where the iPAQ Personal Messenger fails to ignore an incoming call during an active call. - Fixes issue where the iPAQ Personal Messenger fails to switch from 1800 to 1900 band when the user goes into an area with no cell coverage and then re-enters the area with 1900 band cell coverage. - Fixes issue where the iPAQ Personal Messenger fails to attach GPRS with T-Mobile UK SIM card. - Fixes issue of camping on PLMN while in a HPLMN zone by making sure that the network register information will not be sent until RAU/LAU is accepted by the network. |
|
PREREQUISITES: |
- Microsoft ActiveSync 4.2 (or later) is required. - Host PC must be running the Microsoft Windows XP Operating System. |
|
HOW TO USE: |
CAUTION: This update may not be compatible with the Microsoft Windows Vista Operating System and could cause device failure if the host computer for the update is running a Microsoft Windows Vista Operating System. Please check the release notes (Readme file) of this SoftPaq before flashing your device! 1. Download the SoftPaq .EXE file to a directory on your hard drive. 2. Execute the downloaded file and follow the on-screen instructions to unpack the ROM update files to a directory. (NOTE: This directory should not contain any file or folder from any previous ROM upgrade.) 3. Establish an ActiveSync connection between the HP iPAQ Personal Messenger and the host PC using a USB connection. 4. The ROM Update Utility (hpRUU.exe) starts automatically. Follow the on-screen instructions to complete the ROM upgrade. NOTE: Once the update is complete, the .EXE file downloaded in Step 1 can be deleted, if desired. INSTALLATION NOTES: 1. During the update, the ROM Update Utility: - Queries the HP iPAQ Personal Messenger for current ROM image information. - Validates that the new ROM image is compatible with the HP iPAQ Personal Messenger. - Automatically places the HP iPAQ Personal Messenger in Flash mode. - Updates the ROM image on the HP iPAQ Personal Messenger. 2. IMPORTANT: Disable the Standby and Hibernation modes on the host PC. If Standby or Hibernation mode is activated during the upgrade process, a critical error may occur. 3. IMPORTANT: Plan enough time to complete the update. The total time to perform this ROM update is estimated at 20 minutes. 4. IMPORTANT: Do not interact with the HP iPAQ Personal Messenger or remove it from AC power or the cradle/cable once the status bar appears on the HP iPAQ Personal Messenger and the actual update has started. 5. If an error message is displayed during the update process, follow any available instructions to correct the condition, and start the ROM Update Utility again. 6. The update process can be performed while connected to a host PC either as a Guest or with an established partnership. Copyright (c) 2007 Hewlett-Packard Development Company, L.P. |