TITLE: HP Compaq Blade Workstation Client USB Key Image Recovery

VERSION: 09.40 Rev. A
DESCRIPTION:
This package contains the tools and image needed to restore or replace the 
operating system image on the HP Compaq Blade Workstation Client running the HP 
Blade Workstation Client Embedded (OEM) Operating System. 

NOTE: The image contained in this package must be deployed on a 256-MB drive 
key (or larger) using the dskimg32 tool included in this package.

For information about the HP Blade Workstation Client series and the features 
provided by Embedded Operating System (OS) Version 9.40, see the document 
titled "HP Blade Workstation Client series - Embedded OS Version 9.xx," which 
is available from any of the following websites:

www.hp.com/support/bwclient_manuals
www.hp.com/support/dc72_manuals
www.hp.com/support/dc73_manuals 

PURPOSE: Routine
SOFTPAQ NUMBER: SP37781
SUPERSEDES: None
EFFECTIVE DATE: October 30, 2007
CATEGORY: Software
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

HARDWARE PRODUCT MODEL(S):
HP Compaq Blade Workstation Client: All Models
HP dc72 Blade Workstation Client: All Models
HP dc73 Blade Workstation Client: All Models

SOFTWARE PRODUCT(S):
None

OPERATING SYSTEM(S): 
HP Blade Workstation Client Embedded OS

LANGUAGE(S): 
Global

ENHANCEMENTS: 
- Updates HP Remote Graphics Solution (RGS) Receiver to version 5.1.2.

- Updates to HP Session Allocation Manager (SAM) Connection Client version 
2.1.1.

- Adds the following new drivers for the HP dc73 Blade Workstation Client:
* NVIDIA drivers l00.14.23 (for NVS290)
* ALSA 1.0.14, Jack 103 (for audio)
* e1000 driver 7.6.5 (for LAN)
NOTE: The old 7.2.9 LAN driver is retained for the HP dc72 Blade Workstation 
Client.

- Enables auto-mute when headphones are plugged into the HP dc72 and HP dc73 
Blade Workstation Clients.

-Adds the following new keyboards:
* Korean
* Traditional Chinese

- Enables Configurable DHCP communication timeout.

- Adjusts Webmin back-of-system graphics card diagram automatically.

- Updates to Openssl 0.9.8g.

PREREQUISITES: 
- 256-MB (or larger) drive key is required for image deployment.

INSTALLATION INSTRUCTIONS: 
1. Download the SoftPaq .EXE file to a directory on your hard drive. 

2. Execute the downloaded file to extract the files.

NOTE: The dskimg32.exe utility contained in this package is only to be used in 
the deployment of this image. 


To use this SoftPaq, complete the following steps:

1. With the appropriate USB drive key plugged in, open a command window and run 
dskimg32.exe to obtain the drive key ID (only one drive key should be plugged 
in when running this program). HP branded keys are recommended in order to 
guarantee that the image will be copied correctly.
Example: dskimg32.exe
Output will indicate that the USB drive key is mapped to HD*.

2. Run dskimg32.exe client-09.xx.img.
Example: dskimg32.exe client-09.xx.img HD3 (where HD3 is the device ID for your 
drive key).

NOTE: Be sure to use the correct drive key device ID, because all data on the 
device will be replaced by the client image.

3. Start (boot) the HP Compaq Blade Workstation Client from the USB drive key 
and follow the on-screen instructions.


Copyright (c) 2007 Hewlett-Packard Development Company, L.P.