Document revision date: 19 July 1999

Controls whether informational messages that specify the number of entries selected and rejected for each input file are sent to SYS$OUTPUT. By default, these messages are not displayed.

Format

/[NO]LOG

Example

$ ANALYZE/ERROR_LOG/LOG ERRLOG.OLD;5
      

In this example, informational messages generated about ERRLOG.OLD;5 are sent to SYS$OUTPUT.

On Alpha systems, generates a report consisting of event log entries that occurred on the specified CPU.

Format

/MODEL= (hexadecimal-value[,...])

Parameter

hexadecimal-value

Specifies a value obtained from the system console.

In an OpenVMS Cluster environment, you can specify a hexadecimal value for each member. If you specify more than one hexadecimal value, you must specify a comma-separated list of values that is enclosed in parentheses.

Example

$ ANALYZE/ERROR_LOG/MODEL=415 ERRLOG.SYS 
      

In this example, the output consists of only those entries that were logged for the system with a model type of 00000415 (hexadecimal).

Generates a report consisting of error log entries for specific nodes in an OpenVMS Cluster system.

Format

/NODE= (node-name[,...])

Parameter

node-name

Specifies the names of one or more OpenVMS Cluster members. Names cannot exceed six characters. If more than one node name is entered, you must specify a comma-separated list of node names that is enclosed in parentheses.

Example

$ ANALYZE/ERROR_LOG/NODE=(ORANGE,NASSAU) -
_$ SYS$SYSROOT:[SYS*.SYSERR]ERRLOG.SYS) 
      

In this example, the OpenVMS Cluster system consists of members BROOME, NASSAU, ORANGE, and PUTNAM. The output contains only those entries that were logged for nodes NASSAU and ORANGE.

Specifies the output file for the error log report.

Format

/OUTPUT [=file-spec]

Parameter

file-spec

Specifies the output file selected for the error log report. Refer to the OpenVMS User's Manual for details on specifying files. If you omit the output file specification, output is directed to SYS$OUTPUT.

Description

If you omit the /OUTPUT qualifier, output is directed to SYS$OUTPUT. If you specify /OUTPUT=file-spec, the selected output file contains the error log report. If you omit the device or directory specification, the current device and default directory are used. If you omit the file name, the file name of the input file is used. If you omit the file type, the default file type is .LIS.

Do not use /OUTPUT with the /BINARY qualifier.

Example

$ ANALYZE/ERROR_LOG/OUTPUT=ERROR_LOG.LIS ERRLOG.OLD;72
      

In this example, the ouput file ERROR_LOG.LIS contains entries generated from ERRLOG.OLD;72.

Used in conjunction with the /INCLUDE qualifier to generate, in a hexadecimal longword format, a report that consists of device register information.

Format

/REGISTER_DUMP

Description

Use the /REGISTER_DUMP qualifier to get a report that lists the hexadecimal contents of the device registers for the device specified by the /INCLUDE qualifier. The /INCLUDE qualifier must be used with the /REGISTER_DUMP qualifier.

The /REGISTER_DUMP qualifier reports register contents for memory, device error, and device timeout entries. No translation is available of any of the device register information.

Do not use /REGISTER_DUMP with the /BINARY qualifier.

Example

$ ANALYZE/ERROR_LOG/INCLUDE=DB/REGISTER_DUMP ERRLOG.OLD;72
      

In this example, the output is in the format of a REGISTER_DUMP report containing entries that apply only to the DB device.

Allows you to specify the name of a file that will contain binary records for rejected entries.

Format

/REJECTED [=file-spec]

Parameter

file-spec

Specifies the name of the file that is to contain the rejected entries. If you do not specify an output file, the rejected entries are written to the file ERRLOG.REJ in your current directory.

Description

The /REJECTED qualifier creates a binary file that contains copies of the original binary error log entry. If the error log entry is rejected because the command line also specifies an interval (/SINCE, /BEFORE, or /ENTRY qualifier) or a filter (/INCLUDE or /EXCLUDE qualifier), the entry is written to the specified file.

Rejected entries are not translated because they fall into one of the following categories:

• All entries specified with the /EXCLUDE qualifier
• All entries not specified with the /INCLUDE qualifier
• Any entry that does not occur within the period specified by the /SINCE and /BEFORE qualifiers
• Any entry that is not in the range of entries specified by the /ENTRY qualifier

If you specify /REJECTED=file-spec, the output file contains image copies of the rejected records. If you omit the device or directory specification, the current device and default directory are used. If you omit the file name, the file name of the input file is used. If you omit the file type, the default file type is .REJ.

Example

$ ANALYZE/ERROR_LOG/INCLUDE=MTA0/REJECTED=REAL_ERRS.DAT ERRLOG.OLD;5
      

In this example, the output file REAL_ERRS.DAT contains image copies of all entries from ERRLOG.OLD;5, with the exception of those entries that apply to the MTA0 device.

On VAX systems, generates a report consisting of error log entries that occurred on the specified CPU.

Format

/SID_REGISTER= (hexadecimal-value[,...])

Parameter

hexadecimal-value

Specifies a value obtained from the system ID register. Use the $GETSYI system service to obtain this value, which is unique to each system. The OpenVMS System Services Reference Manual describes the $GETSYI system service.

In an OpenVMS Cluster environment, you can specify a hexadecimal value for each member. If you specify more than one hexadecimal value, you must specify a comma-separated list of values that is enclosed in parentheses.

Example

$ ANALYZE/ERROR_LOG/SID_REGISTER=02006148 ERRLOG.OLD;72
      

In this example, the output consists of only those entries that were logged for the system with an ID of 02006148 (hexadecimal).

/SINCE

Specifies that only those entries dated later than the stated date and time are to be selected for the report.

Format

/SINCE [=date-time]

Parameter

date-time

Limits the error report to those entries dated later than the specified time. If you specify /SINCE without a date and time, the default is TODAY. If you omit the /SINCE qualifier, all entries are processed.

Description

Only absolute date and time specifications are valid. Refer to the OpenVMS User's Manual for details on specifying times.

Example

$ ANALYZE/ERROR_LOG/SINCE=19-APR-1998:15:00 ERRLOG.OLD;56
      

In this example, the error log report generated from ERRLOG.OLD;56 contains entries that have been logged since 15:00 on April 19, 1998.

Generates run-time statistical information.

Format

/STATISTICS

Description

Use the /STATISTICS qualifier to generate a report that consists of the page faults, buffered I/O, direct I/O, and CPU time used in the execution of the ANALYZE/ERROR_LOG command.

Example

$ ANALYZE/ERROR_LOG/STATISTICS ERRLOG.OLD;4
      

In this example, the output generated by this command consists of a full report of all entries in ERRLOG.OLD;4 and the run-time statistics for the execution of the command.

10.4 ERROR LOG Examples

An error log report entry contains two sections: identification and device-dependent data. The identification section consists of the first four lines and is generated for all reports. The device-dependent data section, which follows the identification section, contains information about the selected error log entries.

The first line of the identification section gives the error entry number. This number can be used to refer to a particular error log entry in an error log file. The second line contains the error sequence number and the system identification value. The error sequence number is a value assigned by the operating system to an error log entry to help determine if error log entries are being lost. This sequence number value is reset to zero only when the system is rebooted. The third and fourth lines of this section specify the type of error log entry being reported, the date and time the entry was made, the processor type and revision level, and the system serial number.

The first line of the device-dependent data section identifies the device or subsystem on which the error occurred. The remainder of this section consists of hardware information, which shows the contents of the device registers, and software information, which shows the contents of the I/O database at the time of the error.

The OpenVMS System Manager's Manual contains additional information about error log reports, including descriptions of error log entries. These descriptions specify the action recommended for specific entries.

The following output report is an example of the report generated by device errors, device attention, and device timeouts from a disk on the system.

Error Log Report Generator Version 7.1 ******************************* ENTRY 904. ******************************* ERROR SEQUENCE 709. LOGGED ON: CPU_TYPE 00000002 DATE/TIME 20-AUG-1998 15:21:10.79 SYS_TYPE 00000003 SYSTEM UPTIME: 1 DAYS 01:35:47 SCS NODE: LSR3 VAX/VMS V7.1 DEVICE ERROR SYS_TYPE = 03 RZ57 SUB-SYSTEM, UNIT _LSR3$DKA0: HW REVISION 30303035 HW REVISION = 5000 ERROR TYPE 03 COMMAND TRANSMISSION FAILURE SCSI ID 00 SCSI ID = 0. SCSI LUN 00 SCSI LUN = 0. SCSI SUBLUN 00 SCSI SUBLUN = 0. PORT STATUS 00000054 %SYSTEM-F-CTRLERR, FATAL CONTROLLER ERROR SCSI CMD 00000000 0000 TEST UNIT RDY SCSI STATUS FF NO STATUS RECEIVED UCB$B_ERTCNT 0F 15. RETRIES REMAINING UCB$B_ERTMAX 00 0. RETRIES ALLOWABLE ORB$L_OWNER 00000000 OWNER UIC [000,000] UCB$L_CHAR 1CC54008 DIRECTORY STRUCTURED FILE ORIENTED SHARABLE AVAILABLE ERROR LOGGING ALLOCATED CAPABLE OF INPUT CAPABLE OF OUTPUT RANDOM ACCESS UCB$L_STS 56544552 INTERRUPT EXPECTED ONLINE TIMED OUT BUSY DEALLOCATE AT DISMOUNT "MOUNT VERIFICATION" IN-PROGRESS UCB$L_OPCNT 00000000 0. QIO'S THIS UNIT UCB$W_ERRCNT 0001 1. ERRORS THIS UNIT Error Log Report Generator Version 7.1 IRP$L_BCNT 00000000 TRANSFER SIZE 0. BYTE(S) IRP$L_BOFF 00000000 TRANSFER PAGE ALIGNED IRP$L_PID 00010042 REQUESTOR "PID" IRP$Q_IOSB 0000014E 430A0002 IOSB, 0. BYTE(S) TRANSFERRED

Time Stamp, Volume Mount, and Volume Dismount Entries Examples

The following examples show a system time stamp, volume mount, and volume dismount. The time-stamp entry contains only an identification section, which is logged by the operating system at 10-minute intervals. If no other error log entries are made during the 10-minute period, the previous time stamp is overwritten with the current time stamp.

The mount volume entry contains an identification section followed by a device-dependent data section. The device-dependent data section shows the name of the device the volume is mounted on, the volume label (if the volume has a label), and the I/O operations and error counts for the device.

The dismount volume entry contains, in addition to the data provided in the volume mount entry, the I/O operations and error counts for the device on which the volume was mounted.

**************************** ENTRY 93. **************************** ERROR SEQUENCE 421. LOGGED ON SID 01380101 TIME STAMP, 4-MAR-98 11:10:08.79 KA780 REV# 7. SERIAL# 7. **************************** ENTRY 94. **************************** ERROR SEQUENCE 422. LOGGED ON SID 01380101 MOUNT VOLUME, 4-MAR-98 11:14:12.51 KA780 REV# 7. SERIAL# 7. UNIT _DMA0:, VOLUME LABEL "TEST" 656. QIO OPERATIONS THIS UNIT, 1. ERRORS THIS UNIT **************************** ENTRY 95. **************************** ERROR SEQUENCE 423. LOGGED ON SID 01380101 DISMOUNT VOLUME, 4-MAR-98 11:14:41.30 KA780 REV# 7. SERIAL# 7. UNIT _DMA0:, VOLUME LABEL "TEST" 697. QIO OPERATIONS THIS UNIT, 1. ERRORS THIS UNIT 41. QIO OPERATIONS THIS VOLUME, 0. ERRORS THIS VOLUME

Machine Check Entries Examples

The following examples show machine check error reports. Each report consists of three sections: the identification section, the program counter and summary code section, and an error-dependent section.

The program counter and summary code section of the report displays the contents of the program counter, the processor status longword, and the summary code. The contents of the processor status longword and the summary code are described in the text on the right side of the report.

The error-dependent section consists of CPU-dependent information that was logged as a result of the machine check.

******************************* ENTRY 2. ******************************* ERROR SEQUENCE 2. LOGGED ON: CPU_TYPE 00000002 DATE/TIME 4-SEP-1998 09:39:51.19 SYS_TYPE 00000002 SYSTEM UPTIME: 90 DAYS 00:01:25 SCS NODE: COBRA6 VAX/VMS V7.1 MACHINE CHECK SYS_TYPE = 02 KERNEL EVENT HEADER FRAME REVISION 0000 SCB VECTOR 0670 1ST MOST PRB FRU 00 FIELD NOT VALID 2ND MOST PRB FRU 00 FIELD NOT VALID SEVERITY 0000 FIELD NOT VALID CPU ID 0000 ERROR COUNT 0001 THRESHOLD 0000 FAIL CODE 0000 ERR FIELD LOW 00000005 00000008 CPU_0 BUS COMMAND NO-ACK CPU_O BUS READ PARITY ERROR CPU CYCLE ABORTED WITH HARD ERROR ERR FIELD HIGH 00000000 00000000 RETRY/BYTE CNT 00000250 00000000 BYTE COUNT = 00000250(X) CAN'T RETRY PALTEMP0 00000001 00000000 PALTEMP1 000000BE 00000000 PALTEMP2 00000004 001FC0F8 PALTEMP3 00000000 00000000 PALTEMP4 805C3FC0 FFFFFFFF PALTEMP5 00000000 00000000 PALTEMP6 84FDE000 FFFFFFFF PALTEMP7 00004200 00000000 PALTEMP8 00000400 00000000 PALTEMP9 00000003 00000000 PALTEMP10 29CB0233 00000003 PALTEMP11 00000000 00000000 PALTEMP12 00000001 Error Log Report Generator Version 7.1 00000000 PALTEMP13 8042F4C0 FFFFFFFF PALTEMP14 00000000 00000000 PALTEMP15 00000000 00000000 PALTEMP16 0000C000 00000000 PALTEMP17 00000000 00000000 PALTEMP18 BEBC2000 00000000 PALTEMP19 7FFBF924 00000000 PALTEMP20 00002041 00000000 PALTEMP21 40000000 00000002 PALTEMP22 00000000 00000000 PALTEMP23 00000000 00000000 PALTEMP24 805C0000 FFFFFFFF PALTEMP25 00000000 00000000 PALTEMP26 7FF96000 00000000 PALTEMP27 00000000 00000000 PALTEMP28 00D7C000 00000000 PALTEMP29 00000000 00000002 PALTEMP30 002F6000 00000000 PALTEMP31 00D62080 00000000 EXCP ADDR REG 0000815E 00000000 Not PALmode instruction EXCEPTION PC = 0000000000002057(X) EXCP SUM REG 00000000 00000000 EXCP MASK REG 00000000 00000000 ICCS REG 00000004 001FC0F8 PAL BASE 00008000 00000000 PAL BASE PA = 000008000(X) HW INTR EN REG FFFFDCF0 00000001 CRD ERROR INT. ENABLE HARDWARE INT. ENABLED ON PIN 3 Error Log Report Generator Version 7.1 HARDWARE INT. ENABLED ON PIN 4 HARDWARE INT. ENABLED ON PIN 5 PC1 INT. DISABLED PC0 INT. DISABLED HARDWARE INT. ENABLED ON PIN 0 HARDWARE INT. ENABLED ON PIN 1 HARDWARE INT. ENABLED ON PIN 2 SLU INT. DISABLE SOFTWARE INT. LEVEL 1 ENABLED SOFTWARE INT. LEVEL 2 ENABLED SOFTWARE INT. LEVEL 3 ENABLED SOFTWARE INT. LEVEL 4 ENABLED SOFTWARE INT. LEVEL 5 ENABLED SOFTWARE INT. LEVEL 6 ENABLED SOFTWARE INT. LEVEL 7 ENABLED SOFTWARE INT. LEVEL 8 ENABLED SOFTWARE INT. LEVEL 9 ENABLED SOFTWARE INT. LEVEL 10 ENABLED SOFTWARE INT. LEVEL 11 ENABLED SOFTWARE INT. LEVEL 12 ENABLED SOFTWARE INT. LEVEL 13 ENABLED SOFTWARE INT. LEVEL 14 ENABLED SOFTWARE INT. LEVEL 15 ENABLED KERNAL MODE AST INT. ENABLED EXEC. MODE AST INT. ENABLED SUPER. MODE AST INT. ENABLED USER MODE AST INT. ENABLED HW INTR REQ REG 00000702 00000000 HW INTR. REQ PC1 INTR REQ. PC0 INTR REQ. CPU INTR REQ. on pin 0 MEM MGMT ER/DTB 00005110 00000000 Integer Reg. used is R = 11(X) OP code = 28(X) D-CACHE STA REG 000002E0 00000000 D-CACHE ADD REG FFFFFFFF 00000007 ABOX CTL REG 0000040E 00000000 MCHECK ENABLED for UNCOR. ERR CRD INTR. ENABLE ICACHE STREAM BUFFER ENABLED DCACHE ENABLED BIU STATUS REG 00002041 00000000 Hard Error Dcache fill error READ_BLOCK BIU ADD REG 40000000 00000002 BIU CTL REG 30006337 0000000C Error Log Report Generator Version 7.1 External Cache Enable ECC Checking Output Enable of Cache RAMs BCache Read Speed in cycles = 4(X) BCache Write Speed in cycles = 4(X) ECC SYNDROMES 00000000 00000000 FILL ADDR REG 00006120 00000000 MACHINE CHK VA 00006190 00000000 B-CACHE TAG REG 12491412 14480005 TAG Control P TAG Control V B-Cache TAG = 48A0(X) CSR0 400001C1 400001C1 BCC 400001C1 CSR1 00000000 BCCE 00000000 CSR2 00000000 BCCEA 00000000 CSR3 00000900 BCUE 00000900 CSR4 00D40A2D BCUEA 00D40A2D CSR5 0011D4B4 DTER 0011D4B4 CSR6 00007F28 CBCTL 00007F28 98004082 CSR7 98004082 CBE 9C001042 CSR8 90000003 CBEAL 90000003 CSR9 FF200083 CBEAH FF200083 CSR10 00000000 PMBX 00000000 CSR11 00000000 IPIR 00000000 CSR12 00000004 SIC 00000001 CSR13 000C1388 ADLK 000C1388 CSR14 00104B7B MADRL 00104B6B Error Log Report Generator Version 7.1

**************************** ENTRY 6. **************************** ERROR SEQUENCE 3. LOGGED ON SID 03003700 MACHINE CHECK, 6-MAR-1998 10:11:34.70 KA730 REV# 0. MIC# 55. EXCEPTION PC 80038DC0 ERROR PSL 01C00000 INTERRUPT PRIORITY LEVEL = 00. PREVIOUS MODE = USER CURRENT MODE = EXECUTIVE SUMMARY CODE 00000007 UNCORRECTABLE ECC ERROR 1ST PARAMETER 00166200 PAGE #2865. IN ERROR **************************** ENTRY 60. **************************** ERROR SEQUENCE 4872. LOGGED ON SID 02006148 MACHINE CHECK, 6-MAR-1998 03:50:08.28 KA750 REV# 72. MIC# 97. EXCEPTION PC 80006173 ERROR PSL 00C80009 C-BIT N-BIT INTERRUPT PRIORITY LEVEL = 08. PREVIOUS MODE = USER CURRENT MODE = KERNEL SUMMARY CODE 00000002 TRANSLATION BUFFER OR BUS ERROR VA LAST REF 800A079E PC AT ERROR 80006178 MDR 8009F38C SMR 00000008 CPU MODE = KERNEL VIRTUAL READ RLTO 00000000 TBER 00000007 TB G0 DATA ERROR TB G1 DATA ERROR TB G0 TAG ERROR CAER 00000000 BER 00000000 MCESR 00000004 OPERAND REFERENCE TB PARITY ERROR **************************** ENTRY 84. **************************** ERROR SEQUENCE 4949. LOGGED ON SID 01388525 MACHINE CHECK, 6-MAR-1998 15:09:11.31 KA780 REV# 7. SERIAL# 1317. EXCEPTION PC 00004890 ERROR PSL 03C00000 INTERRUPT PRIORITY LEVEL = 00. PREVIOUS MODE = USER CURRENT MODE = USER SUMMARY CODE 00000000 CP READ TIMEOUT - OR ERROR CONFIRMATION FAULT CES 00010084 SUPERVISOR AST PENDING ALU C31 NESTED ERROR MICRO PC 00000200 VA/VIBA 7FF735D4 D REGISTER FFFFC284 TBER0 0000DC81 ENABLE MEMORY MANAGEMENT TB HIT GROUP 1 MICRO CODE "MCT" FIELD = 07 MICRO CODE "ADS" MICRO CODE "FS" TBER1 00000040 LAST TB WRITE PULSE TO GROUP 1 SBITA E00B83F5 TIMEOUT CONSOLE ADDR = 002E0FD4 PROTECTION CHECKED REFERENCE TIMEOUT REFERENCE IN USER MODE CACHE PE REG 00004000 CP ERROR SBIER 00001802 SBI NOT BUSY WAITING FOR READ DATA TIMEOUT CPU TIMEOUT

	privacy and legal statement
6048PRO_026.HTML