|
Document revision date: 19 July 1999
|
![[Compaq]](../../images/compaq.gif) |
![[Go to the documentation home page]](../../images/buttons/bn_site_home.gif)
![[How to order documentation]](../../images/buttons/bn_order_docs.gif)
![[Help on this site]](../../images/buttons/bn_site_help.gif)
![[How to contact us]](../../images/buttons/bn_comments.gif)
|
![[OpenVMS documentation]](../../images/ovmsdoc_sec_head.gif)
|
OpenVMS System Management Utilities Reference
Manual
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be used alone or in
combination. For example,
/SPAN_VERSIONS=(MINIMUM=V2.1,BELOW=V3.0) selects versions
greater than or equal to V2.1 and less than (but not including) V3.0.
Using the MAXIMUM keyword instead of BELOW would select versions that
include V3.0.
/VERSION=version-number
Selects the software product that has the specified version. By
default, selects all versions.
Example
|
$ PRODUCT EXTRACT FILE TEST /SELECT=TEST.EXE /SOURCE=[AL]
|
In this example, the POLYCENTER Software Installation utility extracts
the file TEST.EXE from the sequential kit of the product TEST that is
in the [AL] directory on the user's default disk. The extracted file
TEST.EXE is placed in the user's current default directory.
EXTRACT PDF
Retrieves the product description file (PDF) from a sequentially
formatted software product kit. A file type of .PCSI denotes a
sequential kit. The file type of the extracted PDF file is
.PCSI$DESCRIPTION.
Format
PRODUCT EXTRACT PDF product-name[,...] [/qualifiers]
Parameter
product-name
Names the product, or list of products, whose PDF file is to be
retrieved from the kit.
Qualifiers
/BASE_SYSTEM=base-system-name
Selects software products that are in the named base system. The name
AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX
product, and VMS denotes a product applicable to either OpenVMS Alpha
or VAX. By default, the operation is performed for products with any
base system designation.
/DESTINATION=device-name:[directory-name]
Specifies the location where the utility is to place the extracted
product description file (PDF). If the device name is not provided, the
default is the user's default device. If the directory name is omitted,
or the /DESTINATION= qualifier is not specified, the default is the
user's default directory. The EXTRACT PDF operation ignores the
PCSI$DESTINATION logical name whether or not you use the /DESTINATION
qualifier.
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT=
format-type
|
Designates the format of the product kit as follows:
|
|
|
|
REFERENCE
|
Reference format in which product files exist in a directory tree.
|
|
|
|
|
SEQUENTIAL
|
Sequential format in which product files are placed in
full-product-name.PCSI, a container file.
|
|
|
|
|
|
TYPE=kit-type
|
Specifies the type of product kit as follows:
|
FULL
|
Layered product (application) software.
|
|
|
|
|
OPERATING_SYSTEM
|
Operating system software.
|
|
|
|
|
MANDATORY_UPDATE
|
A required correction to currently installed software. Functionally the
same as a patch kit.
|
|
|
|
|
PARTIAL
|
An upgrade to currently installed software. Installation of this kit
changes the version of the product.
|
|
|
|
|
PATCH
|
A correction to currently installed software. Installation of this kit
does not change the version of the product.
|
|
|
|
|
PLATFORM
|
An integrated set of software products (product suite).
|
|
|
|
|
TRANSITION
|
Information used to register a product in the product database. This
kit does not provide product material.
|
|
/LOG
/NOLOG (default)
Displays messages as the POLYCENTER Software Installation utility
performs an operation.
/PRODUCER=producer-name
Selects software products that the specified manufacturer produces. By
default, selects all producers.
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for the
software product kit or kits. If /SOURCE is not specified, the utility
searches in the location that the logical name PCSI$SOURCE defines. If
PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified,
the POLYCENTER Software Installation utility searches the current
default directory.
/SPAN_VERSIONS=keyword([,...])
Specifies a range of versions. The keywords are:
|
ABOVE=version
|
Selects versions greater than the version specified
|
|
|
|
|
BELOW=version
|
Selects versions less than the version specified
|
|
|
|
|
MINIMUM=version
|
Selects versions greater than or equal to the version specified
|
|
|
|
|
MAXIMUM=version
|
Selects versions less than or equal to the version specified
|
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be used alone or in
combination. For example,
/SPAN_VERSIONS=(MINIMUM=V2.1,BELOW=V3.0) selects versions
greater than or equal to V2.1 and less than (but not including) V3.0.
Using the MAXIMUM keyword instead of BELOW would select versions that
include V3.0.
/VERSION=version-number
Selects the software product that has the specified version. By
default, selects all versions.
Example
|
$ PRODUCT EXTRACT PDF TEST /SOURCE=[AL]
|
In this example, the POLYCENTER Software Installation utility extracts
the product description file (PDF) from the sequential kit of the
product TEST that is in the [AL] directory on the user's default disk
and places it in the user's current default directory.
EXTRACT PTF
Retrieves the product text file (PTF) from a sequentially formatted
software product kit. A file type of .PCSI denotes a sequential kit.
The PTF is stored in a product kit as a text library file. The file
type of the extracted PTF file is .PCSI$TLB. In addition, a text file
version of this text library file is created with a file type of
.PCSI$TEXT.
Format
PRODUCT EXTRACT PTF product-name[,...] [/qualifiers]
Parameter
product-name
Names the product, or list of products, whose PTF file is to be
retrieved from the kit.
Qualifiers
/BASE_SYSTEM=base-system-name
Selects software products that are in the named base system. The name
AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX
product, and VMS denotes a product applicable to either OpenVMS Alpha
or VAX. By default, the operation is performed for products with any
base system designation.
/DESTINATION=device-name:[directory-name]
Specifies the location where the utility is to place the extracted
product text file (PTF). If the device name is not provided, the
default is the user's default device. If the directory name is omitted,
or the /DESTINATION= qualifier is not specified, the default is the
user's default directory. The EXTRACT PTF operation ignores the
PCSI$DESTINATION logical name whether or not you use the /DESTINATION
qualifier.
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT=
format-type
|
Designates the format of the product kit as follows:
|
|
|
|
REFERENCE
|
Reference format in which product files exist in a directory tree.
|
|
|
|
|
SEQUENTIAL
|
Sequential format in which product files are placed in
full-product-name.PCSI, a container file.
|
|
|
|
|
|
TYPE=kit-type
|
Specifies the type of product kit as follows:
|
FULL
|
Layered product (application) software.
|
|
|
|
|
OPERATING_SYSTEM
|
Operating system software.
|
|
|
|
|
MANDATORY_UPDATE
|
A required correction to currently installed software. Functionally the
same as a patch kit.
|
|
|
|
|
PARTIAL
|
An upgrade to currently installed software. Installation of this kit
changes the version of the product.
|
|
|
|
|
PATCH
|
A correction to currently installed software. Installation of this kit
does not change the version of the product.
|
|
|
|
|
PLATFORM
|
An integrated set of software products (product suite).
|
|
|
|
|
TRANSITION
|
Information used to register a product in the product database. This
kit does not provide product material.
|
|
/LOG
/NOLOG (default)
Displays messages as the POLYCENTER Software Installation utility
performs an operation.
/PRODUCER=producer-name
Selects software products that the specified manufacturer produces. By
default, selects all producers.
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for the
software product kit or kits. If /SOURCE is not specified, the utility
searches in the location that the logical name PCSI$SOURCE defines. If
PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified,
the POLYCENTER Software Installation utility searches the current
default directory.
/SPAN_VERSIONS=keyword([,...])
Specifies a range of versions. The keywords are:
|
ABOVE=version
|
Selects versions greater than the version specified
|
|
|
|
|
BELOW=version
|
Selects versions less than the version specified
|
|
|
|
|
MINIMUM=version
|
Selects versions greater than or equal to the version specified
|
|
|
|
|
MAXIMUM=version
|
Selects versions less than or equal to the version specified
|
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be used alone or in
combination. For example,
/SPAN_VERSIONS=(MINIMUM=V2.1,BELOW=V3.0) selects versions
greater than or equal to V2.1 and less than (but not including) V3.0.
Using the MAXIMUM keyword instead of BELOW would select versions that
include V3.0.
/VERSION=version-number
Selects the software product that has the specified version. By
default, selects all versions.
Example
|
$ PRODUCT EXTRACT PTF TEST /SOURCE=[AL]
|
In this example, the POLYCENTER Software Installation utility extracts
the product text file (PTF) from the sequential kit of the product TEST
that is in the [AL] directory on the user's default disk and places two
files in the user's current default directory: the extracted text
library file (.PCSI$TLB) and a text file (.PCSI$TEXT) created from the
library.
EXTRACT RELEASE_NOTES
Retrieves the release notes for the selected product or group of
products. If no output file name is given, the release notes are
written to a file named DEFAULT.PCSI$RELEASE_NOTES in the user's
default directory.
Format
PRODUCT EXTRACT RELEASE_NOTES product-name[,...] [/qualifiers]
Parameter
product-name
Names the product, or list of products, from which to extract release
notes.
Qualifiers
/BASE_SYSTEM=base-system-name
Selects software products that are in the named base system. The name
AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX
product, and VMS denotes a product applicable to either OpenVMS Alpha
or VAX. By default, the operation is performed for products with any
base system designation.
/FILE=filespec
Specifies the name of the output file that will contain the release
notes. If no file name is given, the release notes are written to a
file named DEFAULT.PCSI$RELEASE_NOTES in the current directory.
/KIT_ATTRIBUTES=keyword([,...])
Selects kits by kit type or kit format, or both. Keywords are:
FORMAT=
format-type
|
Designates the format of the product kit as follows:
|
|
|
|
REFERENCE
|
Reference format in which product files exist in a directory tree.
|
|
|
|
|
SEQUENTIAL
|
Sequential format in which product files are placed in
full-product-name.PCSI, a container file.
|
|
|
|
|
|
TYPE=kit-type
|
Specifies the type of product kit as follows:
|
FULL
|
Layered product (application) software.
|
|
|
|
|
OPERATING_SYSTEM
|
Operating system software.
|
|
|
|
|
MANDATORY_UPDATE
|
A required correction to currently installed software. Functionally the
same as a patch kit.
|
|
|
|
|
PARTIAL
|
An upgrade to currently installed software. Installation of this kit
changes the version of the product.
|
|
|
|
|
PATCH
|
A correction to currently installed software. Installation of this kit
does not change the version of the product.
|
|
|
|
|
PLATFORM
|
An integrated set of software products (product suite).
|
|
|
|
|
TRANSITION
|
Information used to register a product in the product database. This
kit does not provide product material.
|
|
/LOG
/NOLOG (default)
Displays messages as the POLYCENTER Software Installation utility performs the operation.
/PRODUCER=producer-name
Selects software products that the specified manufacturer produces. By
default, selects all producers.
/SOURCE=device-name:[directory-name]
Specifies the disk and directory where the utility searches for the
software product kit or kits. If /SOURCE is not specified, the utility
searches in the location that the logical name PCSI$SOURCE defines. If
PCSI$SOURCE is not defined, and the /SOURCE qualifier is not specified,
the POLYCENTER Software Installation utility searches the current default directory.
/SPAN_VERSIONS=keyword([,...])
Specifies a range of versions. The keywords are:
|
ABOVE=version
|
Selects versions greater than the version specified
|
|
|
|
|
BELOW=version
|
Selects versions less than the version specified
|
|
|
|
|
MINIMUM=version
|
Selects versions greater than or equal to the version specified
|
|
|
|
|
MAXIMUM=version
|
Selects versions less than or equal to the version specified
|
The ABOVE, BELOW, MINIMUM, and MAXIMUM keywords can be used alone or in
combination. For example,
/SPAN_VERSIONS=(MINIMUM=V2.1,BELOW=V3.0) selects versions
greater than or equal to V2.1 and less than (but not including) V3.0.
Using the MAXIMUM keyword instead of BELOW would select versions that
include V3.0.
/VERSION=version-number
Selects the software product that has the specified version. By
default, selects all versions.
/WORK=device:[directory]
Specifies the name of the device and directory acting as a temporary
work area. By default, temporary files are created in subdirectories of
the user's login directory.
Example
|
$ PRODUCT EXTRACT RELEASE_NOTES XYZ/VERSION=2.3/FILE=[RN]XYZ.TXT
|
The command in this example places the release notes for Version 2.3 of
the product XYZ in a file named [RN]XYZ.TXT on your current default
device.