[ 前のページ ] [ 次のページ ] [ 目次 ] [ 索引 ]
この付録では,Advanced Serverのインストレーションおよび構成プロシージャの例を示します。
次に,Advanced Serverのインストレーション・ ダイアログの例を示します。この例は,これまでAdvanced Serverをインストールしたことのないシステムにインストレーションを行ったときのものです。 システムにすでにAdvanced Serverがインストールされている場合は, インストレーション・ダイアログが少し異なります。
$ @SYS$UPDATE:VMSINSTAL ASOVMSJA072 SYS$DEVICE:[KITS.ASOVMSJA] OpenVMS AXP Software Product Installation Procedure V7.2 It is 3-NOV-1998 at 09:31. Enter a question mark (?) at any time for help. * Are you satisfied with the backup of your system disk [YES]? <Return> The following products will be processed: ASOVMSJA V7.2 Beginning installation of ASOVMSJA V7.2 at 09:31 %VMSINSTAL-I-RESTORE, Restoring product save set A ... %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP. Advanced Server V7.2 for OpenVMS Installation (c) Digital Equipment Corporation 1998. All rights reserved. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) of DFARS 252.227-7013, or in FAR 52.227-19, or in FAR 52.227-14 Alt. III, as applicable. This software is proprietary to and embodies the confidential technology of Digital Equipment Corporation. Possession, use, or copying of this software and media is authorized only pursuant to a valid written license from Digital or an authorized sublicensor. Please select from the following install options: Advanced Server V7.2 for OpenVMS (complete) Advanced Server V7.2 for OpenVMS license server (only) External Authentication images (only) * Do you want to install the complete Advanced Server for OpenVMS [YES]? <Return> The following components will be installed: Advanced Server V7.2 for OpenVMS (complete) If the selection is correct, the installation will continue. If the selection is not correct, you can change your selection. Press CTRL/Y if you want to terminate the installation. * Is the selection correct [YES]? <Return> %ASOVMS-I-VERSION, Checking for OpenVMS version 7.2 ... * Do you want to run the IVP after the installation is finished [YES]? <Return> * Do you want to purge files replaced by this installation [YES]? <Return> %ASOVMS-I-FREEBLKS, Checking for 139500 free blocks User Accounts and User Identification Codes (UICs) -------------------------------------------------- The Advanced Server V7.2 for OpenVMS installation creates two OpenVMS accounts: a default account, PWRK$DEFAULT, and a guest account, PWRK$GUEST. The default UIC group number for both these new accounts depends on the following: o If you are installing the server for the first time, the default is the first unused UIC group number, starting with 360. o If there is an existing account PCFS$ACCOUNT, the default is the UIC group number associated with PCFS$ACCOUNT. o If there is an existing account PWRK$DEFAULT or PWRK$GUEST, the default is the UIC group number associated with PWRK$DEFAULT or PWRK$GUEST, in preference to PCFS$ACCOUNT. However, the default UIC group number will not be used to change the UIC of any existing accounts. For more information about UIC group numbers, see the OpenVMS System Manager's Manual. * Enter default UIC group number for PWRK$DEFAULT and PWRK$GUEST [360]: <Return> All questions have been answered. The installation of the Advanced Server for OpenVMS will continue. %ASOVMS-I-ACCOUNTS, Creating OpenVMS accounts for PWRK$DEFAULT and PWRK$GUEST %VMSINSTAL-I-ACCOUNT, This installation creates an ACCOUNT named PWRK$DEFAULT. %UAF-I-ADDMSG, user record successfully added %UAF-I-RDBADDMSGU, identifier PWRK$DEFAULT value [000360,000001] added to rights database %VMSINSTAL-I-ACCOUNT, This installation creates an ACCOUNT named PWRK$GUEST. %UAF-I-ADDMSG, user record successfully added %UAF-I-RDBADDMSGU, identifier PWRK$GUEST value [000360,000002] added to rights database %VMSINSTAL-I-RESTORE, Restoring product save set B ... %VMSINSTAL-I-RESTORE, Restoring product save set C ... %ASOVMS-I-DEFOBJS, Defining DECnet objects PCX$SERVER and PCSA$MAIL %ASOVMS-I-DCLCMDS, Installing the Advanced Server DCL commands %ASOVMS-I-SPECIFY, Specifying target directories for the provided files %ASOVMS-I-OBSOLETE, Deleting obsolete files Next Steps ---------- To continue the installation procedure, enter the following command to execute the server configuration command procedure: $ @SYS$UPDATE:PWRK$CONFIG For information about the configuration command procedure, see the Advanced Server V7.2 for OpenVMS Installation and Configuration Guide. %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories... (c) Digital Equipment Corporation 1998. All rights reserved. Starting Installation Verification Procedure for Advanced Server V7.2 for OpenVMS %PWRK-I-NORMAL, IVP completed successfully Installation of ASOVMSJA V7.2 completed at 09:40 Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY Creating installation data file: VMI$ROOT:[SYSUPD]ASOVMSJA072.VMI_DATA VMSINSTAL procedure done at 09:40
次に,Advanced Serverの構成ダイアログの例を示します。
$ @SYS$UPDATE:PWRK$CONFIG Advanced Server V7.2 for OpenVMS Configuration Procedure The Advanced Server stores and accesses the following types of data files: o Configuration parameter files o License server data files o Log files o Printer spool files o Virtual memory section files You can specify any existing OpenVMS disk device that has at least 76500 free blocks of disk space to store these data files. Note: The server frequently accesses the data files stored on the disk. If these files are stored on the system disk, it can degrade the performance of both the OpenVMS system and the server. Therefore, Digital recommends that you specify a disk other than the system disk. Enter disk device name where the Advanced Server data files will be stored [PWROOT:]: <Return> Creating Advanced Server directory tree on PWROOT:... PWRK$LICENSE_SERVER_STATE.DAT already exists, not superseded. %CREATE-I-EXISTS, PWRK$COMMONROOT:[000000] already exists Checking to see if the OpenVMS Registry Services are available... %RUN-S-PROC_ID, identification of created process is 0000023B Populating OpenVMS Registry with required Advanced Server & NT parameters... Please wait, this may take one to two minutes to complete ... Required OpenVMS Registry file server keys and values have been created. Migrating LANMAN.INI parameters to the OpenVMS Registry... Verifying SAM database files... Creating Advanced Server directory tree... Copying client files to Advanced Server directory tree... Changing the server configuration parameters will allow you to modify this server's client capacity and select the transports to be used. SPEEDY is currently configured to + support 20 PC clients + use the following transport(s): DECnet If you want this server to be the primary domain controller, you should configure it to use all the transports used by any of the backup servers in the domain. If you want this server to be a backup domain controller, you should configure it to have at least one transport in common with the domain's primary domain controller, otherwise this configuration will fail. If you do not change the configuration parameters now, you may do so later by typing ADMIN/CONFIG. Do you want to change the server configuration parameters now? [YES]: NO Reading current configuration parameters ... Your Advanced Server for OpenVMS is presently configured to run as follows: 1. Run the license server: NO 2. Enable Timesource service: NO 3. Enable Alerter service: YES 3a. Alert user names: Administrator 4. Enable Netlogon service: YES 5. Advanced Server domain: LANGROUP 6. Advanced Server role: PRIMARY 7. Advanced Server computer name: SPEEDY 8. Server announce comment: Advanced Server V7.2 for OpenVMS Enter item number, or RETURN to use these values [DONE]: 5 An Advanced Server domain is a collection of computers that share a common security database and policy. Each domain has a unique name. A network can have many domains. The Advanced Server domain name can be up to 15 characters long. The domain name must be different than the computer name. Enter Advanced Server domain name for this system [5]: SPUNKY.DOM Your Advanced Server for OpenVMS is presently configured to run as follows: 1. Run the license server: NO 2. Enable Timesource service: NO 3. Enable Alerter service: YES 3a. Alert user names: Administrator 4. Enable Netlogon service: YES 5. Advanced Server domain: SPUNKY.DOM 6. Advanced Server role: PRIMARY 7. Advanced Server computer name: SPEEDY 8. Server announce comment: Advanced Server V7.2 for OpenVMS Enter item number, or RETURN to use these values [DONE]: <Return> Saving parameters to the OpenVMS Registry... Creating SAM datafiles... Creating sharefile PWRK$LMROOT:[LANMAN.DATAFILES]SHAREDB ... New sharefile has been created. ADMIN$ added IPC$ added PWUTIL added PWLICENSE added PWLIC added The Advanced Server Administrator network account is used to administer the server. The Administrator network account is mapped by default to the OpenVMS SYSTEM account. The network account password can be up to 14 characters long and the case of the characters used will be preserved. Enter Administrator network account password: Re-enter to verify password: Changing password for Administrator network account... Checking system resources... The current system configuration for SPEEDY will support 20 PC clients. The Advanced Server is configured to use DECnet, NetBEUI, TCP/IP. To automatically start the Advanced Server V7.2 for OpenVMS at system startup, you should add the following line to the SYS$MANAGER:SYSTARTUP_VMS.COM file. $ @SYS$STARTUP:PWRK$STARTUP Note: Add this line below the lines that start all network transports (such as DECnet). Do you want to start the Advanced Server V7.2 on node SPEEDY now [YES]: <Return> The file server will use DECnet, NetBEUI, TCP/IP. Advanced Server mail notification will use DECnet. Process NETBIOS created with identification 00000248 Process PWRK$NBDAEMON created with identification 0000024A Process PWRK$KNBDAEMON created with identification 0000024C Process PWRK$LICENSE_R created with identification 0000024E Checking to see if the OpenVMS Registry Services are available... The Advanced Server is configured to support 20 PC clients. Process PWRK$MASTER created with identification 00000251 The master process will now start all other Advanced Server processes. $