CP/M pages
Home -> CP/M -> BIOS

CP/M Basic Input/Output System

The BIOS is the machine-dependent part of CP/M. In theory, all you need to do is change the BIOS and CP/M will work on a different machine. The same used to be true of MSDOS...

The BIOS begins with the following jumps to service routines:

	JMP	BOOT	;Cold start routine
	JMP	WBOOT	;Warm boot - reload command processor
	JMP	CONST	;Console status
	JMP	CONIN	;Console input
	JMP	CONOUT	;Console output
	JMP	LIST	;Printer output
	JMP	PUNCH	;Paper tape punch output
        JMP     READER	;Paper tape reader input
	JMP	HOME	;Move disc head to track 0
	JMP	SELDSK	;Select disc drive
	JMP	SETTRK	;Set track number
	JMP	SETSEC	;Set sector number
	JMP	SETDMA	;Set DMA address
	JMP	READ	;Read a sector
	JMP	WRITE	;Write a sector

In CP/M 2 and later, the following extra jumps appear:

	JMP	LISTST	;Status of list device
	JMP	SECTRAN	;Sector translation for skewing

In CP/M 3, a further set of jumps is present:

	JMP	CONOST	;Status of console output
	JMP	AUXIST	;Status of auxiliary input
	JMP	AUXOST	;Status of auxiliary output
	JMP	DEVTBL	;Address of devices table
	JMP	DEVINI	;Initialise a device
	JMP	DRVTBL	;Address of discs table
	JMP	MULTIO	;Read/write multiple sectors
	JMP	FLUSH	;Flush host buffers
	JMP	MOVE	;Move a block of memory
	JMP	TIME	;Real time clock
	JMP	SELMEM	;Select memory bank
	JMP	SETBNK	;Select bank for DMA operation
	JMP	XMOVE	;Preload banks for MOVE
	JMP	USERF	;System-depedent functions
	JMP	RESERV1	;Reserved
	JMP	RESERV2	;Reserved

BOOT

This function is completely implementation-dependent and should never be called from user code.

WBOOT

Reloads the command processor and (on some systems) the BDOS as well. How it does this is implementation-dependent; it may use the reserved tracks of a floppy disc or extra memory.

CONST

Returns its status in A; 0 if no character is ready, 0FFh if one is.

CONIN

Wait until the keyboard is ready to provide a character, and return it in A.

CONOUT

Write the character in C to the screen.

LIST

Write the character in C to the printer. If the printer isn't ready, wait until it is.

PUNCH

Write the character in C to the "paper tape punch" - or whatever the current auxiliary device is. If the device isn't ready, wait until it is.

READER

Read a character from the "paper tape reader" - or whatever the current auxiliary device is. If the device isn't ready, wait until it is. The character will be returned in A. If this device isn't implemented, return character 26 (^Z).

HOME

Move the current drive to track 0.

SELDSK

Select the disc drive in register C (0=A:, 1=B: ...). Entered with DE=0 or FFFFh. If DE=0, the disc will be logged in; if it is FFFFh, no attempt will be made to read it.

SELDSK returns the address of a Disc Parameter Header in HL.

SETTRK

Set the track in BC - 0 based.

SETSEC

Set the sector in BC. Under CP/M 1 and 2 a sector is 128 bytes. Under CP/M 3 the sector size is given in the Disk Parameter Block.

SETDMA

The next disc operation will read its data from (or write its data to) the address given in BC.

READ

Read the currently set track and sector

WRITE

Write the currently set track and sector. C contains a deblocking code:

C=0 - Write can be deferred
C=1 - Write must be immediate
C=2 - Write can be deferred, no pre-read is necessary.

LISTST

Return status of current printer device.

Returns A=0 (not ready) or A=0FFh (ready).

SECTRAN

Translate sector numbers to take account of skewing.

On entry, BC=logical sector number (zero based) and DE=address of translation table. On exit, HL contains physical sector number.

CONOST

Return status of current screen output device.

Returns A=0 (not ready) or A=0FFh (ready).

AUXIST

Return status of current auxiliary input device.

Returns A=0 (not ready) or A=0FFh (ready).

AUXOST

Return status of current auxiliary output device.

Returns A=0 (not ready) or A=0FFh (ready).

DEVTBL

Return in HL the address of the devices table, or 0 if the devices table isn't implemented. The devices table contains 13 entries, one for each character device. Each entry is formed:

	DEFB	'NAME  '	;Name, 6 bytes. Zero if this device is
				;not used.
	DEFB	mode		;Bitmapped value:
				;Bit 0 set => can input from this device
				;Bit 1 set => can output to this device
				;Bit 2 set => can change the baud rate
				;Bit 3 set => supports XON/XOFF
				;Bit 4 set => is using XON/XOFF
				;Bits 5,6,7 set to 0.
	DEFB	baudrate	;Coded speed, 1-15 or 0 if speed can't be
				;changed.
				;Rates are 50,75,110,134.5,150,300,600,1200,
				;         1800,2400,3600,4800,7200,9600,19200.

DEVINI

Initialise character device number C - called when the device's settings (baud rate, mode etc.) are changed.

DRVTBL

Return in HL the address of the drive table, or 0 if the drive table isn't implemented. The drive table contains 16 pointers to the Disc Parameter Headers of the 16 disc drives A-P; if a pointer is 0 it means that the corresponding drive does not exist.

The drive table is usually (but not always) in common memory (ie accessible by user programs).

MULTIO

Notify the BIOS that the BDOS is intending to transfer a number of consecutive disc sectors with READ or WRITE. Entered with C = number of calls that will be made; up to 16k of data will be transferred.

The idea is that after the MULTIO call, the BIOS can choose to transfer all the data in the first READ/WRITE operation, and then not to do anything on the subsequent (n-1) operations.

FLUSH

Write any pending data to disc.

Returns A=0 if successful, 1 for physical disc error, 2 for drive R/O.

This function is only useful when the BIOS is doing the deblocking - ie, the physical sector size is not the size that the BIOS reports to the BDOS.

MOVE

Move BC bytes of memory, from the address in HL to the address in DE. Should return HL and DE pointing to the first addresses not copied. If XMOVE is used before this function, data are moved between two memory banks.

TIME

Get the current date and time into the SCB (at CBOOT-0Ch). HL and DE must be preserved. If C=0FFh, then set the time from the SCB instead.

The format of the 5-byte buffer is:

	DW	day	;Day 1 is 1 Jan 1978
	DB	hour	;packed BCD
	DB	minute	;packed BCD
	DB	second	;packed BCD

SELMEM

Set the current bank to the number in A. Bank 1 is the bank in which user programs run (the TPA); Bank 0 and any other banks are used by CP/M for disc buffers or as a RAMdisc.

SETBNK

Set the bank to be used for the next read/write sector operation. The bank number is passed in A.

XMOVE

After XMOVE, the next call to MOVE will move data between different memory banks. Call XMOVE with C=source bank and B=destination bank.

USERF

This function is reserved for the author of the BIOS to add any extra features. On Amstrad computers, for example, this call accesses the extended BIOS functions.

RESERV1 and RESERV2

These calls are reserved and contain JMP 0 instructions.

Return to archive listing