***************** FIXPAK FOR IBM OS/2 CSD LEVEL XR06200 *********************
                              IMPORTANT
                              ---------
    PLEASE READ THE FOLLOWING TERMS AND CONDITIONS. DOWNLOADING
    THE SERVICE FIX THAT FOLLOWS, INDICATES YOUR ACCEPTANCE OF THE
    FOLLOWING TERMS AND CONDITIONS:

    - YOU MUST BE, AND YOU AGREE THAT YOU ARE, A PRIOR LICENSEE OF OS/2
      VERSION 2.11
    - YOU MAY MAKE COPIES OF THE OS/2 VERSION 2.11 SERVICE FIX EQUAL TO
      THE NUMBER OF LICENSED COPIES OF OS/2 VERSION 2.11 YOU POSSESS
    - YOU MAY ONLY USE THIS SERVICE FIX FOR MAINTENANCE PURPOSES
    - ALL OTHER TERMS AND CONDITIONS OF YOUR OS/2 VERSION 2.11 LICENSE
      AGREEMENT APPLY TO THIS SERVICE FIX; HOWEVER, THIS DOES NOT EXTEND ANY
      WARRANTY OUTLINED IN SUCH AGREEMENT.
*****************************************************************************
***************************************
OS/2 2.11 FIXPAK              = XR0P002
CORRECTIVE SERVICE LEVEL(CSD) = XR06200
***************************************
BUILD LEVEL 6.659
-----------------
AFFECTED MODULE(s):
------------------
LASERJET.DRV
GENERIC.DLL
HP_ADDF.DLL
PCLHELP.HLP

APAR(s) FIXED:
-------------
APAR= PJ14240
HOST PRINTING THROUGH COMMUNICATIONS MANAGER/2 USING HP LASERJET
SERIES II, FIRST LINE WILL NOT PRINT OR WILL PRINT HALF OF LINE

APAR= PJ12350
THE HP LASERJET, THE TIMES NEW FONT LETTERS OVERLAPP OR EXTRA
SPACES ARE ADDED IN BETWEEN LETTERS WHEN PRINTING FROM 123G

APAR= PJ12360
PM PRINT WILL DEFAULT TO THE OPPOSITE CASSETTE ( TRAY ) SELECTED
WITH THE KYOCERA F-2000A/F-2200S PRINTER ( LASERJET .DRV )

APAR= PJ11724
PRINTING FROM CM/2 3270 USING THE HPIV LASERJET DRIVER CAUSES AN
EXTRA BLANK PAGE TO BE EJECTED.

*************************************************************************

To INSTALL this fix perform the following steps :

   Use these printer drivers as you would your original printer driver
    diskettes that were shipped with OS/2.

   - Unpack printer driver with LOADDSKF to a directory on your system or
     to a diskette
   - Open the printer object(s) and deselect all drivers you have
     acquired this fix for and select another driver file as default.
   - Close the printer object.
   - Reboot the system without letting any print jobs print.
   - Open the printer object settings and printer driver and select
     install from one of the driver objects.
   - The "Install New Printer Driver" dialog will appear.
   - Select "Other OS/2 Printer Driver" and enter the drive and/or
     directory that you have put the driver files into for the install.
   - Press Install button and a message box will appear asking if you
     would like to replace the driver with the new level and select yes.
   - Close the "Install New Printer Driver" dialog and select the correct
     driver for the print object
   - Close print object.

You will now be ready to print using the driver.  If you need additional
help installing the printer driver, please refer to the on-line help
facility.

 Note:
    If you are in a network environment, we suggest that you match printer
    driver levels between both the server and the requestors.