Subject:  OS/2 WARP install problem on ZEOS Pantera Pentium 90 MH.

Problems with the installation of WARP were solved by a simple change in the hard disk 
definition in the CMOS.

My new ZEOS has a 1 gigabyte Seagate IDE hard disk.  The IDE controller is built into the 
motherboard.  The disk is segmented with a 1 MB dual boot partition, an 80 MB DOS partition (for
Windows 3.1 and DOS) (drive C:), a 300 MB HPFS partition (drive D:) and a 700 MB HPFS partition
(drive E:).  There is also a Mitsumi CD-ROM drive which also runs off of the IDE controller. (OS/2 2.1 could not find the Mitsumi but WARP found it nicely.

Problems came during installation of WARP.  There were a random series of error messages, 
and the IBM help people could contribute nothing in the way of assistance.  Fate intervened
when I inadvertently wiped out the CMOS and had to re-define the setup.  The hard disk set
up has a "PRE-FETCH" option with the cautionary note to disable it if using an operating system
"other than DOS".  With the pre-fetch disabled, installation went smoothly, with no errors.