 

Multimedia Modem v1.00 -> v1.02 upgrade changes:


To use the new update files, the new files must be extracted from the
file named "CSDMM102.DSK".  To make a diskette with the new files use
LOADDSKF. If you do not have LOADDSKF it to may be downloaded from the
IBM BBS at phone number 919-517-0001. At the system command prompt in
the directory where LOADDSKF.EXE is located;
Type "LOADDSKF d:CSDMM102.DSK b:"  Where d is the source drive where the
file CSDMM102.DSK is located, and b is the target drive where the new
files will be created.


WINDOWS
--------

1. Setup:

~ins0762.lib
setup.ins

These two files should be copied onto the root of the Windows Mwave
disk #1.  The two files add the following features:

  - Improved Mwave DiskSpace detection.
  - OS2 Warp Full Pack support added.
  - Improved Uninstall of Mwave on systems using QEMM and other Memory
    Managers
  - Installs correctly on machines that have Windows on a different drive
    than DOS
  - Improved uninstall...v1.00 left an empty  mwgames.drvş section.


  - Product section added to the MWAVE.INI file
         Productş
        Name = Multimedia Modem
        Version= 1.02

2. Full Duplex Speaker Phone:

spk07dx.dsp

This file is normally installed to "C:\DSP2\MWW\FAXTAM".  Spk07dx.dsp
fixes the following problems:

  - Little or no feedback from the microphone through the speakers with
    this file.

  - "Wave" noises are no longer present during speaker phone conversations.

  - Sound quality of speaker phone is improved.

3. Manager

MEIOSLWW.DRV

This file is normally found in the C:\DSP2\MWW\MANAGER directory.
This file:

  - Gives improved Rapid Resume functionality.
  - Allows for CD sound through the speakers ONLY if AUX=CD.
  - Improved volume control on the audio control panel.



4. CONFIGURATION

configw.exe


This file is normally found in the C:\DSP2\SOHO directory.
Changes:

   - COM IRQ and CD BASE ADDRESS problems fixed.
   - Copyright changed to 1995
   - NEW OBI default setting for the board.


DOS
----

1. Installation:

install.exe

This file should be copied to the root of Mwave DOS disk1.  Installing
using this EXE sets "MWGAMES ON" as the default in the AUTOEXEC.BAT.


2. Configuration

  configw.exe  (SEE WINDOWS).

OS2
----

1. Setup:

setup.ins
install.cmp

   These two files should be copied to the root of Mwave for OS/2 disk #1.

   Changes in setup.ins :

   - Bug fixes for Uninstall - remove Mwave Audio driver for OS/2 V2.11 from
     CONFIG.SYS.

   - Product section added to the MWAVE.INI file
   Productş
  Name = Multimedia Modem
  Version= 1.02

   - Checks appropriate min. disk space required to install Mwave for OS/2.

   - setup.ins allows for variable destination directory name.

   - fixed problem where system beeps during Mwave OS/2 installation.


   Changes in install.cmp :

   - Added product name and default directory name for OS/2 install. These values
     are required by setup.ins to perform the installation appropriately .


2. Full Duplex Speaker Phone

spk07dx.dsp

   This file is normally copied into the "C:\DSP2\MWOS2\DSP", depending on where Mwave OS/2 is
installed.

   SEE Windows (Full Duplex) for spk07dx.dsp specifics.


3. CONFIGURATION

configo.exe
mwbd0700.sys

   These 2 files are found in "C:\DSP2\MWOS2\BIN", depending on where Mwave OS/2 is installed.

   Changes:
   - Copyright changed to 1995
   - NEW OBI default setting for the board.
   - the "CD-ROM Type" setting can now be stored.


4. MULTIMEDIA MODEM EXTENSION

setup.cmd ( for WARP )

   This file should be copied to the root of OS/2 WARP Audio Disk #1.

   Changes :
   - Auxiliary Control icon is created first before executing MINSTALL.EXE .


setup.cmd ( for OS/2 V2.11 )

   This file should be copied to the root of OS/2 V2.11 Audio Disk #1.

   Changes :
   - Auxiliary Control icon is created first before executing MINSTALL.EXE .                                   