OS/2 Device Driver Pak Online
IBM Skip to main content
     Home  |  Products & services  |  Support & downloads  |  My account

CDROM Drives, OS/2 Component Updates
OS/2 CDROM Support
Additional OS/2 CDROM Support
Last Updated on: 07/29/2002 01:41 PM

Product Information

Bus Type:

Product Chip / Technologies:




Driver Information


Primary Driver
Download this device driver: idedasd.exe
Driver Support: OS/2

This product is supported by IBM. For Technical Assistance, please refer to the following sources:

  1. Any README documentation contained within the driver.
  2. Technical reference material shipped with your device / system,
  3. The Users Guide to OS/2 Warp, and other reference material contained within the OS/2 Warp product,
  4. The IBM Software home page for technical support information in your country.
FixPak 35 (FP35) for Warp 3 and FixPak 6 (FP6) for Warp 4 extended support for fixed Enhanced IDE drives to sizes up to 8.4GB and added new caching HPFS and FAT file system support for removable media drives such as SCSI Syquest Syjet 1.5GB portable hard drive and the Iomega jaz 1GB and 2GB personal hard drives. This package contains updates to the support in FP35 and FP6, extending support to fixed Enhanced IDE drives greater than 8.4GB, fixing some problems, and adding additional documentation on removable media support. Beginning with FP40 and FP10 OS/2 base device drivers were separated into a Base Device Driver FixPak. If you have installed Base DD FixPak 3 AND FP44 or FP14 or later this package is not required. This package also contains an update to IBM1FLPY.ADD to correct a failure on Resume with the diskette drive is in a ThinkPad docking station. This fix can be installed separately by copying the IBM1FLPY.ADD driver only to x:\os2\boot, where x: is the boot drive. This package now contains support for Intel ICH4/4M (mobile) DASD controllers.






Manufacturer Information

OS/2 CDROM Support


Company Web Site: www.ibm.com
FTP site:
Technical Support:
BBS:
Sales:
General inquiries: 1-800-IBM-CALL

Note: All telephone numbers are in the USA unless otherwise specified. If you are calling from outside the USA and Canada, please prefix all numbers with the correct international dialing code and country code.

Please contact the manufacture or visit their WWW site to obtain contact information local to your country.