OSIN2742 - TRAP0003 ON STARTUP USING AN ADAPTEC 2742 CONTROLLER
08/12/96
======================================================================
           TRAP0003 On Startup Using an Adaptec 2742 Controller
======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

A trap 0003 error occurs after the logo screen when starting OS/2 Warp, 
either from the hard drive or from diskette.

RESOLUTION

Change the adapter card settings from edge triggered interrupts to 
level triggered interrupts. Refer to the vendor hardware documentation 
that comes with the controller for instructions on how to change this. 
This will resolve the problem. 

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.