================= OS/2 PRINT SUBSYSTEM PRINTER DRIVER  =====================
================= FIXPAK FOR OS/2 v2.11 AND ABOVE      =====================
 
                              IMPORTANT
                              ---------
    PLEASE READ THE FOLLOWING TERMS AND CONDITIONS. DOWNLOADING
    THE SERVICE FIX THAT FOLLOWS, INDICATES YOUR ACCEPTANCE OF THE
    FOLLOWING TERMS AND CONDITIONS:
 
    - YOU MUST BE, AND YOU AGREE THAT YOU ARE, A PRIOR LICENSEE OF OS/2
      VERSION 2.11 AND ABOVE
    - YOU MAY MAKE COPIES OF THE OS/2 VERSION 2.11 AND ABOVE SERVICE FIX
      EQUAL TO THE NUMBER OF LICENSED COPIES OF OS/2 VERSION 2.11 AND
      ABOVE YOU POSSESS
    - YOU MAY ONLY USE THIS SERVICE FIX FOR MAINTENANCE PURPOSES
    - ALL OTHER TERMS AND CONDITIONS OF YOUR OS/2 VERSION 2.11 AND ABOVE
      LICENSE AGREEMENT APPLY TO THIS SERVICE FIX; HOWEVER, THIS DOES NOT
      EXTEND ANY WARRANTY OUTLINED IN SUCH AGREEMENT.
=============================================================================
 
OS/2 Printer FixPak Name = XR0P011
 
Printer driver level     = 30.461
 
Modules included in this FixPak are:
 PSCRIPT.DRV
 PSCRIPT.HLP
 
APARs corrected by this FixPak are:
 
Note: Some fixed APARs may NOT be listed below. If you received this
      FixPak through the IBM OS/2 support channel and your requested
      APAR(s) is/are NOT listed, please install this FixPak, your
      requested APAR(s) is/are included.
=========================================================================
 
APAR= PJ16172
 GPISETTEXTALIGNMENT DOES NOT WORK WITH PSCRIPT.DRV
 
APAR= PJ17082
 PRINTING PROBLEM WITH WARP AND NOVELL.
 
APAR= PJ20122
 PRINTED EXCEED CLIP LIMIT ON PSCRIPT PRINT.
 
APAR= PJ18750
 SYS3178 IN PSCRIPT.DRV, WHEN INVOKING FAXWORKS AND ALSO IBM WORKS
 WORD PROCESSOR WHEN IBM4029 AS DEFAULT PRINTER.
 
 
APAR= PJ20341
 SYS3175 IN PMMERGE.DLL 0004:000BA5A2 (PCSWS.EXE THREAD1)
 WHEN PRINTING FROM A 3270 SESSION WITH A POSTSCRIPT PRINTER.
 
APAR= PJ20726
 OS/2 WARP POSTSCRIPT DRIVER DOES NOT HONOR NEWLINE CHARACTER IN
 JOB NAME.
 
APAR= PJ20947
 WHEN PRINTING FROM PERSONAL COMMUNICATIONS, GETTING OBLIQUE LINE
 AND THE STRING POSITION IS NOT CORRECT.
 
APAR= PJ21069
 PSCRIPT.DRV DOES NOT HAVE THE VERSION LEVEL IN THE PRINTER
 SETTINGS ON VERSION 30.453.
 
APAR= PJ21574
 THERE IS NO DUPLEX OPTION IN THE LEXMARK OPTRA POSTSCRIPT
 PRINTER DRIVER VERSION 30.460.
 
=========================================================================
 
To INSTALL this fix perform the following steps :
 
   Use these printer drivers as you would your original printer driver
    diskettes that were shipped with OS/2.
 
   - Unpack printer driver with LOADDSKF to a directory on your system or
     to a diskette
   - Open the printer object(s) and deselect all drivers you have
     acquired this fix for and select another driver file as default.
   - Close the printer object.
   - Reboot the system without letting any print jobs print.
   - Open the printer object settings and printer driver and select
     install from one of the driver objects.
   - The "Install New Printer Driver" dialog will appear.
   - Select "Other OS/2 Printer Driver" and enter the drive and/or
     directory that you have put the driver files into for the install.
   - Press Install button and a message box will appear asking if you
     would like to replace the driver with the new level and select yes.
   - Close the "Install New Printer Driver" dialog and select the correct
     driver for the print object
   - Close print object.
 
You will now be ready to print using the driver.  If you need additional
help installing the printer driver, please refer to the on-line help
facility.
 
 Note:
    If you are in a network environment, we suggest that you match printer
    driver levels between both the server and the requestors.