----------------- OS/2 PRINT SUBSYSTEM PRINTER DRIVER  ---------------------
-----------------        FIXPAK FOR OS/2 ONLY          ---------------------
 
                              IMPORTANT
                              ---------
    PLEASE READ THE FOLLOWING TERMS AND CONDITIONS. DOWNLOADING
    THE SERVICE FIX THAT FOLLOWS, INDICATES YOUR ACCEPTANCE OF THE
    FOLLOWING TERMS AND CONDITIONS:
 
    - YOU MUST BE, AND YOU AGREE THAT YOU ARE, A PRIOR LICENSEE OF OS/2
      VERSION 2.11 AND ABOVE
    - YOU MAY MAKE COPIES OF THE OS/2 VERSION 2.11 AND ABOVE SERVICE FIX
      EQUAL TO THE NUMBER OF LICENSED COPIES OF OS/2 VERSION 2.11 AND
      AND ABOVE YOU POSSESS
    - YOU MAY ONLY USE THIS SERVICE FIX FOR MAINTENANCE PURPOSES
    - ALL OTHER TERMS AND CONDITIONS OF YOUR OS/2 VERSION 2.11 AND ABOVE
      LICENSE AGREEMENT APPLY TO THIS SERVICE FIX; HOWEVER, THIS DOES NOT
      EXTEND ANY WARRANTY OUTLINED IN SUCH AGREEMENT.
 
---------------------------------------
OS/2 PRINTER FIXPAK           = XR0P013
---------------------------------------
-------------------
PRNTR LEVEL 30.461
-------------------
-------------------
AFFECTED MODULE(s):
-------------------
OMNI.DRV
OMNI.HLP
--------------
APAR(s) FIXED:
--------------
 
---------------------------------------------------------------------
Note: Some fixed APARs may NOT be listed below. If you received this
      FixPak through the IBM OS/2 support channel and your requested
      APAR(s) is/are NOT listed, please install this FixPak, your
      requested APAR(s) is/are included.
---------------------------------------------------------------------
 
APAR= PJ16043
 THE NAME OMNI.OKIDATA XXX IS MISLEADING. THIS DRIVER USES THE
 EPSON LANGUAGE AND NOT AN OKIDATA LANGUAGE.
 
APAR= PJ16991
 WHEN USING THE OMNI.DRV, AFTER PRINTING FROM A SPREADSHEET, FAX
 PROGRAM, ETC. PRINTS BLANK PAGES FROM DOS, OS2 WINDOW.
 
APAR= PJ18134
 EPSON STYLUS OMNI DRIVER WON'T PRINT FROM A DOS APP AFTER
 PRINTING FROM AN OS/2 SESSION.
 
APAR= PJ18337
 WHEN PRINTING TO HP DESKJET 540 PRINTER, PRINTER DRIVER VERSION
 30.437 THE ERROR MESSAGE POPS UP "ASSERTION FAILED", IN OS/2 TK
 
APAR= PJ19715
 WHEN PRINTING TO OMNI PRINTER DRIVER V30.437 IN CONNECT FULLPACK
 THE ERROR POPS UP WITH "ASSERTION FAILED", WHEN PRINTING PRTSAM
 
APAR= PJ19235
 EPSON STYLUS COLOR USING THE OMNI DRIVER DOES NOT
 EJECT SHORT FORMS.
 
APAR= PJ19276
 EPSON STYLUS COLOR USING THE OMNI DRIVER DOES NOT
 EJECT SHORT FORMS.
 
APAR= PJ19384
 UNABLE TO PRINT ON COM10-ENVELOPE OPTION USING HP DESKJET
 PRINTER WITH OMNI.DRV(30.444) FROM DESCRIBE 5.0.
 
APAR= PJ19385
 UNABLE TO PRINT ON COM10-ENVELOPE OPTION USING HP DESKJET 520
 PRINTER WITH OMNI.DRV FROM DESCRIBE 5.0.
 
APAR= PJ20311
 PRINTS LARGE CHARACTERS ON Y CO-ORDINATES AND PRINTS FINE ON X
 CO-ORDINATES WHEN USING 360X360 RESOLUTION WITH EPSON LQ2550.
 
APAR= PJ21994
 CANON BJC610 IS NOT SUPPORTED BY OS/2.
 
APAR= PJ21986
 HP DESKJET 850C IS NOT SUPPORTED BY OS/2
 
 
---------------------------------------------------------------------
 
To INSTALL this fix perform the following steps :
 
   Use these printer drivers as you would your original printer
   driver diskettes that were shipped with OS/2.
 
   - Unpack printer driver with LOADDSKF to a directory on your system
     or to a diskette
   - Open the printer object(s) and deselect all drivers you have
     acquired this fix for and select another driver file as default.
   - Close the printer object.
   - Reboot the system without letting any print jobs print.
   - Open the printer object settings and printer driver and select
     install from one of the driver objects.
   - The "Install New Printer Driver" dialog will appear.
   - Select "Other OS/2 Printer Driver" and enter the drive and/or
     directory that you have put the driver files into for the install.
   - Press Install button and a message box will appear asking if you
     would like to replace the driver with the new level and select yes.
   - Close the "Install New Printer Driver" dialog and select the correct
     driver for the print object
   - Close print object.
 
You will now be ready to print using the driver.  If you need additional
help installing the printer driver, please refer to the on-line help
facility.
 
Note:
 If you are in a network environment, we suggest that you match printer
 driver levels between both the server and the requestors.