Theseus3 for OS/2
                        ComponentID = 5639F9310

FUNCTION:

        Theseus is a memory analysis program for the OS/2 system used to:

         Determine the amount of memory consumed by each process.
         Determine working set information on a system basis or per process.
         Detect memory leaks on system wide basis or per process.
         Examine application memory (in hexadecimal notation)
         Examine selected OS/2 system control blocks (formatted)
         Examine selected machine registers and control blocks (formatted)

         See the THESEUS3.INF file for detailed usage instructions, or
         reference the online help while using Theseus.


INSTALLATION:

        1. To install Theseus, create a directory into which you want to
           install this product.

               MKDIR \THESEUS

        2. Change into the directory that you have just made.

               CD \THESEUS

        3. The file THES3xxx.EXE is a self-extracting zip file. Run
           THES3xxx.EXE to extract the contents into the current directory.
           'xxx' is the Theseus version number, e.g. 000.

        4. To enable Theseus on your system you must add a DEVICE=
           statement added to your CONFIG.SYS as follows:

              DEVICE=X:\THESEUS\THESEUS5.SYS

                Where X: is the drive where THESEUS5.SYS is installed.

        5. If you have installed a previous version of Theseus, then you
           should remove any older Theseus device driver statements from
           CONFIG.SYS at this time. The old device driver for Theseus2,
           THESEUS2.SYS, does not work with this version nor does
           THESEUS2.EXE work with this device driver, THESEUS5.SYS.

        6. Now that you have updated the CONFIG.SYS, you will need to
           re-boot your machine to activate the device driver THESEUS5.SYS.

        7. After restarting your system, you may run THESEUS3.EXE.