1)  Open the OS/2 System folder

2)  Open the System Setup folder

3)  Run the Create Utility Diskettes and create all 3 diskettes (2-boot 1-utility)

4)  Edit the CONFIG.SYS on the boot diskette #2:
	a) Change the line MEMMAN=NOSWAP,PROTECT to MEMMAN=SWAP,PROTECT
	b) Add the line SWAPPATH=X:\ 1024 1024 on the line under the memman line where 
	    X: is a formated hard disk drive.
	c) Add the line DEVICE=X.SYS to the end of the CONFIG.SYS file
	    X: is FTDVR.SYS if you are using a floppy controlled tape drive.
	    X: is PTDVR.SYS if you are using a paralled controlled tape drive.
	    X: is TC15DVR.SYS if you are using a CMS TC-15 hi-speed tape adapter.
	    X: is TTDVR.SYS if you are using BackMaster v1.1a and have a CMS Trakker tape drive.

5)  Copy the appropriate driver, as detailed in 4c, to the second boot floppy.

6)  Copy the following files to the Utility Disk (#3)

	BMREST.EXE 
	BMREST.CFG
	QICCOMPR.DLL
	KBDCALLS.DLL

7)  Shutdown your system and test the Recover Diskettes and BMREST.
MSRDevelopment
P.O. Box 632070
Nacogdoches, TX  75963
Phone (409) 564-1862
BBS (409) 560-5970
FAX (409) 560-5868
Creating Boot and Utility Diskettes under OS/2 Warp for BackMaster

Rev 3/10/95