The following things are not mentioned in the docs for the C&T 65545 driver 
that is in the OS2CT.EXE file.

1. If you unzip the files, copy them to a floppy and install from the 
floppy...which is how almost everyone does it...the the label on the Floppy 
must be CTDISP 1...and yes, there is a blank before the 1. Normally, the 
diskette would be DISP 1, but that will not work for this driver.

2. Early in the install, you will see an undocumented dialog asking of you 
want to use the defaults or install some utilities. Read the Help and install 
the utilities only if you are sure you qualify. 99.44% of the users can use 
the defaults. All Versa and Toshibe machines that have the 65545 can use the 
defaults, I think.

3. Do not have any WINOS2 sessions active when you do the install or some 
WINOS2 files will not get copied because they will be in use.

4. When asked if you want to replace some newer WINOS2 Font files, I replied 
yes and have had no problems. At least one other user replied no and has had 
WINOS2 problems. I would strongly suggest you reply yes.

Finally, follow the instructions exactly even though it means a botting a few 
times during the process.

At the end of the install, you will be at 480x640 with 256 colors, but the 
Video Page in the System Notebook will have entries you can use to change to 
800x600 and 1024x768.