OSDIFLSH - FLASH CARDS WILL NOT WORK WITH THINKPAD 355 AND 360 SYSTEMS 07/22/96 ======================================================================= Flash Cards Will Not Work with ThinkPad 355 and 360 Systems ======================================================================= Please Read Entire Document for Full Explanation of Procedures -------------------------------------------------------------- DESCRIPTION The IBM 2 MB PCMCIA Memory Flash cards fail on ThinkPad 355 and 360 systems. The error most commonly seen is: SYS0039: Device not ready error EXPLANATION: One of the following has occurred: 1. The device is not ready or is empty. 2. The device driver for COMn is not installed or COMn was shut down and further use of it is disabled. ACTION: Do one of the following and retry the command: 1. Insert a diskette in the drive and close the drive door or wait until the drive is available. 2. a. Check the CONFIG.SYS file for the DEVICE=COM.SYS statement. b. Shut down the system. During restart, note and refer to any messages regarding COMn. c. Issue MODE COMn from a command prompt to see if COMn exists. 3. Be sure there is hardware for COMn. This error seems to occur while copying files to the card. None of the ACTION suggestions mentioned above will remedy the problem. RESOLUTION After this error is received, the card becomes unusable and must be formatted by using FFORMAT2. At this time, there is no fix available to allow these cards to be used on these ThinkPad systems. This error has only been seen with the IBM 2 MB PCMCIA Memory Flash cards. warp4 ______________________________________________________________________ IBM disclaims all warranties, whether express or implied, including without limitation, warranties of fitness and merchantability with respect to the information in this document. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.