OSDIISCD - INSTALLING OS/2 2.1 FROM THE IBM ISA CD-ROM
01/18/96

=======================================================================
              Installing OS/2 2.1 from the IBM ISA CD-ROM
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

You need the following for installation:

* The correct switch settings on the interface card. See the CD-ROM
  manual.

* The diskette with the driver, ISACDOS2.ADD.

* The OS/2 diskettes or the CD-ROM installation package.

RESOLUTION

Note: Make sure you have a backup of any file you intend to change.

Installation
------------
1. Do a DISKCOPY of OS/2 Diskette 1.

2. Edit the CONFIG.SYS file and add the device-driver statement:

      BASEDEV=ISACDOS2.ADD /M:xxx

   (xxx is the hexadecimal address set on the switches.)

3. Start the installation.

Support after Installation
--------------------------
 1. Open OS/2 System.

 2. Open Command Prompts.

 3. Select OS/2 Window.

 4. Type E CONFIG.SYS.

 5. Add the statement, BASEDEV=ISACDOS2.ADD /M:xxx (xxx is the
    hexadecimal address set on the switches).

 6. Save and exit the file.

 7. Type EXIT.

 8. Close Command Prompts.

 9. Select System Setup.

10. Select Selective Install.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.