OSDISYSX - INTERNAL ERROR WHEN RUNNING SYSINSTX IN OS/2 2.1 OR OS/2 2.11
02/07/96

=======================================================================
     Internal Error when Running SYSINSTX in OS/2 2.1 or OS/2 2.11
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

After starting the system from diskettes, the following message is 
received when running SYSINSTX on an OS/2 HPFS partition of the hard 
disk from drive A:

   An internal error occurred.

RESOLUTION

Add the UHPFS.DLL file to the diskette that has SYSINSTX:

1. Do a DISKCOPY of the OS/2 Installation Diskette.

2. Delete the BUNDLE file from the new Installation Diskette.

3. Copy UHPFS.DLL from Diskette 2 to the new Installation Diskette. If
   you have OS/2 on CD-ROM, the file is in the \DISK_2 directory.

4. Start the system from the new Installation Diskette.

5. When prompted, remove the Installation Diskette and insert Diskette
   1; then press Esc to get to a command prompt.

6. Type SYSINSTX X: and press Enter. The message "System file
   transferred" appears, indicating that the file, OS2BOOT, was copied
   to the drive.

7. Remove the diskette from drive A; then restart the system.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.