OSDIZEOP - ERROR MESSAGES WHILE INSTALLING OS/2 WARP ON A ZEOS PANTERA
12/07/95

=======================================================================
     Error Messages while Installing OS/2 Warp on a ZEOS Pantera
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

During installation of OS/2 Warp on a ZEOS Pantera system, intermittent 
traps are experienced, usually during phase 2 of the installation. The 
following error message appears:

   SYS3175:  A program encountered a problem and cannot continue.

Note: The exact message varies; it could be something other than 
SYS3175.

The system has a 90-MHz Pentium processor, Phoenix BIOS Version 4.03, 
and an Enhanced IDE controller.

RESOLUTION

1. Disable the Prefetch setting from the BIOS setup. (This setting is
   on one of the menus for the hard drive.)

2. Restart the system and the installation.

Note: The Prefetch option is associated with the controller, so this
      problem might occur on any system with hardware that supports
      such a setting, not just a system with a Pentium processor.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.