OSIN1475 - SYS1475 ERROR MESSAGE WHEN STARTING OS/2
12/21/95

=======================================================================
                 SYS1475 Error Message when Starting OS/2
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

* SYS1475 & SYS2027, Cannot boot to OS2.
* SYS1475 & SYS2027, OS2BOOT cannot be found.
* SYS1475 & SYS2027, Operating System missing.

  Note: The system also displays this error if a diskette is
        in drive A. If there IS a diskette in drive A, remove
        it and restart the system.

RESOLUTION

Do the following steps to restore your system files back to the hard 
disk.

1. Insert the Installation Diskette in drive A.

2. Turn on the system, or press Ctrl+Alt+Del if it is already on.

3. When prompted, remove the Installation Diskette and insert Diskette
   1; then press Enter.

4. When the Welcome screen appears:

   * For OS/2 Warp, press F3 to display the command prompt.
   * For OS/2 2.X, press Esc to display the command prompt.

5. Reinsert the Installation Diskette.

6. Type SYSINSTX x: and press Enter (x is the drive where OS/2 is
   installed).

7. Upon completion, remove the diskette and restart the system.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.