OSINACPA - INSTALLING M-ACPA WITH NON-M-ACPA AUDIO SUPPORT IN OS/2 WARP
01/15/96

=======================================================================
     Installing M-ACPA with Non-M-ACPA Audio Support in OS/2 Warp
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

This procedure consists of two phases.

Phase 1 installs all M-Audio Capture and Playback Adapter (M-ACPA) 
cards during OS/2 Warp base installation. All non-M-ACPA audio devices 
must be removed to prevent their installation from auto-detection.

Phase 2 uses Selective Install to install all Non-M-ACPA audio devices 
removed during Phase 1. All M-ACPA cards must be removed to prevent 
their re-installation from auto-detection.

All M-ACPA cards must be installed before installing any non-M-ACPA 
audio devices. There is no work-around for installing M-ACPA devices 
and non-M-ACPA devices, and then installing an additional M-ACPA using 
another Selective Install.

RESOLUTION

Phase 1: Full OS/2 Warp Installation
------------------------------------
1. Select the Multimedia Device Support button in the System
   Configuration window.

2. Highlight the Non-M-ACPA device in the Device in the System to be
   Installed list box in the Device Selections and Settings window.

3. Select Remove.

4. Repeat steps 2 and 3 until all non-M-ACPA audio devices are removed.

5. Select the Device Settings push button for the remaining IBM M-Audio
   Adapter selections in the Devices in System to be Installed list box.

6. Select the number of M-ACPA cards in your system from the M-Audio
   Settings window; then select OK.

7. Select OK in the Device Selections and Settings window.

8. Select OK when all installable options are set correctly.

9. Complete the OS/2 Warp installation.


Phase 2: Selective Install of OS/2 Warp
---------------------------------------
 1. Open OS/2 System.

 2. Select Selective Install.

 3. Select Multimedia Device Support in the System Configuration window.

 4. Highlight IBM M-Audio Adapter in the Device in the System to be
    Installed list box.

 5. Select Remove.

 6. Highlight the non-M-ACPA audio device removed during Phase 1 from
    the Supported Devices list box in the Device Selections and
    Settings window.

 7. Select Add.

 8. Highlight the newly added Non-M-ACPA audio device in the Devices in
    System to be Installed list box.

 9. Select the Device Settings button.

10. Set the appropriate settings for the card-specific pop-up window;
   then select OK when complete.

11. Repeat steps 5 through 9 until all non-M-ACPA audio devices are
    added.

12. Select the OK button in the Device Selections and Settings window.

13. When the installable options are set correctly, select OK in the
    System Configuration window.

14. Ensure Multimedia Software Support is checked in the OS/2 Setup and
    Installation window; then select the Install push button.

15. Complete the OS/2 Warp Selective Install.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.