OSINADTY - MISMATCH OF SCSI DEVICES AND ADAPTER TYPES DURING OS/2
           WARP INSTALLATION
01/15/96

=======================================================================
        Mismatch of SCSI Devices and Adapter Types during OS/2
                          Warp Installation
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

OS/2 Warp 3.0 CD-ROM installation fails if the adapter is SCSI type I 
and the CD-ROM is SCSI type II.

After the device drivers are loaded, the screen clears with no cursor 
pointer. The drive A light remains on.

You can see the list of device drivers by restarting the system and 
then pressing Alt+F2 when the rectangular box appears in the upper-left
corner.

RESOLUTION

Change the CD-ROM jumper for SCSI type I. For example, an NEC 3XI 
CD-ROM, which is a SCSI II device, is connected to a Future Domain 
1680, a SCSI I device. Change the NEC CD-ROM jumper to SCSI I.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights. 
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.