OSINBLCK - BANDS ON SCREEN AFTER DISKETTE 5 RESTART ON A GATEWAY 2000
01/29/96

=======================================================================
      Bands on Screen after Diskette 5 Restart on a Gateway 2000
                        OS/2 2.1 and OS/2 2.11
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

During installation on a Gateway 2000 486/66 with a local bus and ATI 
Graphics Ultra Pro, the system gets to the screen displaying the OS/2 
Full Screen symbol. The screen then displays 5 or 6 horizontal bands of 
video separated by black bands that scroll horizontally across the 
screen.

RESOLUTION

Run the Setup program for the ATI card and set up the monitor as an IBM 
default:

1. Start the system with DOS.

2. Change to the MACH32 directory.

3. Type INSTALL and press Enter.

4. At the Main Selection screen, select Set power up configuration.

5. At the next screen select Monitor type.

6. The next screen should have the 1572 Monitor with 72 Hz refresh rate
   highlighted. Press Enter to select it.

7. Select IBM default as the new monitor.

After a successful installation, repeat these steps to reselect the 
1572 Monitor.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.