OSINCDDK - HARD DISK TO HARD DISK INSTALLATION ON LAPTOPS
01/09/97

=======================================================================
                 Hard Disk to Hard Disk Installation on Laptops 
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

This document describes the steps necessary to install OS/2 Warp from 
the hard drive on laptop systems which cannot use the diskette drive 
and CD-ROM drive at the same time.

RESOLUTION

Hard Drive to Hard Drive Installation

1. Start your system with the CD-ROM drive attached and the OS/2 Warp 
   CD-ROM in the drive.

2. Make a temporary directory called TEMP; type MD TEMP and 
   press Enter.

3. Type

   XCOPY X:\os2image\*.* /S C:\TEMP and press Enter.

   where:

   X: is the CD-ROM drive, and
   C: is a drive containing enough disk space to place
      the images and OS/2.

4. Restart the system with the diskette drive attached. 
   Create a DISKCOPY of the OS/2 Warp Diskette 1 by typing 
   the following at the command prompt:
 
     DISKCOPY A: A:

5. With the DISKCOPY of Diskette 1 in the drive, type 
   COPY A:\CONFIG.SYS A:\CONFIG.001, then press Enter.

6. Use a text editor to edit the CONFIG.SYS on the new Diskette 1 and 
   make the following changes: 

   buffers=32
   iopl=yes
   memman=swap,delayswap
   protshell=sysinst1.exe
   set os2_shell=sysinst2.exe C:\temp
   diskcache=D2,LW
   protectonly=yes
   libpath=.;\;\os2\dll;\os2\install;
   ifs=hpfs.ifs /c:64
   pauseonerror=no
   codepage=850
   devinfo=kbd,us,keyboard.dcp
   devinfo=scr,ega,vtbl850.dcp
   device=\dos.sys
   device=\mouse.sys
   set path=\;\os2;\os2\system;\os2\install
   set dpath=\;\os2;\os2\system;\os2\install
   set keys=on
   basedev=ibmkbd.sys
   basedev=ibm1flpy.add
   basedev=ibm1s506.add /A:0 /!bm
   rem basedev=ibm2flpy.add
   rem basedev=ibm2adsk.add
   rem basedev=ibm2scsi.add
   rem basedev=ibmint13.i13
   basedev=os2dasd.dmd
   device=\testcfg.sys
   basedev=xdfloppy.flt

   rem set os2_shell=cdinst.exe
   rem set saveconnect=1
   rem set cdrominst=1
   rem ifs=cdfs.ifs /q
   rem basedev=aha152x.add
   rem basedev=aha154x.add
   rem basedev=aha164x.add
   rem basedev=aha174x.add
   rem basedev=aic7870.add
   rem basedev=btscsi.add
   rem basedev=fd16-700.add
   rem basedev=fd8xx.add
   rem basedev=fd7000ex.add
   rem basedev=dpt20xx.add
   rem basedev=dac960.add
   rem basedev=flashpt.add
   rem basedev=ipsraid.add
   rem basedev=ql10os2.add
   rem basedev=ql40os2.add
   rem basedev=ql510.add
   rem basedev=chincds1.flt
   rem basedev=hitcds1.flt
   rem basedev=neccds1.flt
   rem basedev=sonycds1.flt
   rem basedev=toshcds1.flt
   rem basedev=ibmidecd.flt
   rem basedev=tmv1scsi.add
   rem basedev=sony535.add
   rem basedev=lms206.add
   rem 154569 basedev=lms205.add
   rem basedev=mitfx001.add
   rem basedev=sbcd2.add
   rem device=\os2cdrom.dmd
   rem set os2_shell=cdboot.exe
   rem set oemprogram=\ibminst\npconfig.exe
   rem set exitwhendone=1

   Save and Exit the file.

7. You can begin the OS/2 installation with the following:

   - OS/2 Warp Installation Diskette
   - OS/2 Warp Diskette 1, modified as in step 6
   - Diskette images in the \TEMP directory on the hard disk

   Insert the OS/2 Installation Diskette in drive A: and restart
   the system. When prompted for Diskette 1, use the modified copy.

warp4
______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.