OSINIBMD - IBM1S506.ADD AND IBMINT13.I13 DRIVERS CANNOT BE USED IN
           OS/2 WARP
12/13/95
 
=======================================================================
   IBM1S506.ADD and IBMINT13.I13 Drivers Cannot be Used in OS/2 Warp
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

During installation, the following error message is received at 
Diskette 1:

   The existing partition table on your hard disk was created by an
   earlier version of the operating system. The partition table was
   updated to ensure compatibility with the current version of the
   operating system.

   The system must be restarted so that the updated partition table can
   be recognized during system installation.

   Remove the Diskette from drive A.

   Insert the Installation Diskette in drive A.

   Press the Enter key.

RESOLUTION

This message means that the IBM1S506.ADD or IBMINT13.I13 driver cannot 
be used. If the IDE or SCSI controllers are not on the supported list, 
contact the vendor to get an OS/2 driver.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.