OSININTR - INTERNAL CD-ROM NOT RECOGNIZED DURING OS/2 WARP INSTALLATION
01/29/96

=======================================================================
     Internal CD-ROM Not Recognized during OS/2 Warp Installation
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

During installation of OS/2 Warp, the CD-ROM driver, OS2CDROM.DMD, 
cannot be found.

RESOLUTION

This is a hardware problem.

On the back of the CD-ROM drive, set the jumper that controls the bus 
device number to 0.

Most sound-card manufacturers leave the setting at the factory default 
of 1. If it is not set to 0, Diskette 1 does not load OS2CDROM.DMD, and 
the installation stops with a red screen indicating the CD-ROM cannot 
be found.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.