OSINNE20 - SELECTIVE INSTALL LOCKS UP WITH NE2000 ETHERNET CARD
01/29/96

=======================================================================
         Selective Install Locks Up with NE2000 Ethernet Card
                         All OS/2 Releases
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

A system with an NE2000 Ethernet card locks up during Selective Install,
just before displaying the screen for hard disk space.

RESOLUTION

The NE2000 card uses 320H as the default port address, which causes the 
lockup during Selective Install. You need to change the port address 
(for example, 300H, 340H, 300H) and the IRQ.

The requester settings need to be changed in NETCFG.

Refer to the documentation that came with the adapter, or contact the 
vendor, for additional information.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.