OSINPCSV - INSTALLING OS/2 WARP 3.0 ON AN IBM PC SERVER 8640-1PT
12/22/95

=======================================================================
         Installing OS/2 Warp 3.0 on an IBM PC Server 8640-1PT
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

This document describes how to install OS/2 Warp on an IBM PC Server 
with PCI Fast SCSI-2.

RESOLUTION

Note: Make sure you have a backup of any file you intend to change.

1. If installation is from a CD, do a DISKCOPY of OS/2 Warp Diskette 1.

2. Label the diskette, OS/2 Warp v3 Diskette 1 for PC Server.

3. Copy the IBMPSCSI.ADD file from the IBM PCI Fast SCSI-2 Support
   Diskette, which came with the system, to the new Diskette 1.

   Note: If there is not enough room for the file on the diskette,
         delete AHA*.* files. These are for Adaptec controllers.

4. Edit the CONFIG.SYS file on the new Diskette 1 and add the following
   statement AFTER the IBMINT13.I13 statement:

      BASEDEV=IBMPSCSI.ADD

   Note: Remove the BASEDEV=AHA* statements.

5. Save and exit the file.

6. Restart the system from the Installation Diskette. When prompted to
   insert Diskette 1, use the revised Diskette 1.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.