OSINPMT2 - OS/2 PMTAPE VERSION 2 LOCKS UP IF OS/2 IS ON DRIVE D:
           OR ABOVE
06/13/96

=======================================================================
    OS/2 PMTape Version 2 Locks Up if OS/2 is on Drive D: or Above
=======================================================================

Please Read Entire Document for Full Explanation of Procedure
-------------------------------------------------------------

DESCRIPTION

When OS/2 is installed on a drive other than C:, the system locks up or 
fails to see the tape drive when opening the application.

RESOLUTION

The OS/2 PMTape Version 2 installation program automatically updates 
whatever CONFIG.SYS file is on the C: drive. If you have OS/2 installed 
on a drive other than C:, the CONFIG.SYS file in that drive is not 
updated.

After installing PMTape Version 2, add the following lines to the 
CONFIG.SYS file on the drive where you have installed PMTape:

  Device = X:\pmtape\ip2idrv.sys
  Run = X:\pmtape\itdmn.exe

  where X: is the drive where you installed PMTape.

Shut down and restart your system. The problem should be solved.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.