OSINSNY1 - SONY 31A CD-ROM ATTACHED TO A CARDINAL DSP16 IS
           NOT RECOGNIZED - OS/2 WARP
01/08/96

=======================================================================
            Sony 31A CD-ROM Attached to a Cardinal DSP16 Is
                       Not Recognized - OS/2 Warp
=======================================================================

Please Read Entire Document for Full Explanation of Procedure
-------------------------------------------------------------

DESCRIPTION

OS/2 Warp 3.0 does not recognize the SONY 31A connected to the Cardinal 
DSP16 card. The Installation program requests the CD and then starts 
looping and repeatedly asking for the CD.

RESOLUTION

The port address and IRQ for the CD-ROM are incorrect.

You probably downloaded the driver, SONY31A.ADD, and used the 
parameters specified in the User's Guide to OS/2 Warp. By default, the 
sound port address is 220h and the IRQ is 5. The CD-ROM is set for port 
address 300 and IRQ 12.

Use the driver that came with OS/2 Warp and modify the SONY31A.ADD 
statement in the CONFIG.SYS file to read:

   SONY31A.ADD /A:0 /AT:05 /P:0300 /I:12 /V

Note: The port address and IRQ above should be for the CD-ROM, not the
      sound card.

/P: is the address of the CD-ROM; /I: is the IRQ of the CD-ROM drive; /V
 is for View (shows if the CD-ROM is recognized when the driver is 
loaded).

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.