OSINTO53 - LOSING ACCESS TO TOSHIBA 530B CD-ROM DURING INSTALLATION
09/25/96
=======================================================================
     Losing Access to Toshiba 5302B CD-ROM During Installation
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------
DESCRIPTION

During installation, you are prompted to reinsert the CD-ROM, but it is 
currently in the drive. This message is displayed after the first half 
of the install is complete and you are prompted to remove the 
diskette.   

RESOLUTION

In some cases, the installation will continue after a restart. If not, 
do the following:

 Make sure the following statements are in the CONFIG.SYS file:

     BASEDEV=IBMIDECD.FLT
     DEVICE=N:\OS2\BOOT\OS2CDROM.DMD (where N: is the drive that OS/2 
                                                          is installed on)
     IFS=CDFS.IFS
     BASEDEV=IBM1S506.ADD

To edit the CONFIG.SYS file, restart the system and press Alt-F1 when 
'OS/2' and the white rectangle appear in the top left corner of the 
screen. Choose F2 to exit to a command prompt.  

From the root directory of the startup drive, type TEDIT CONFIG.SYS, 
then press Enter. Press Esc and make the necessary changes to the 
file.  Press F4 to save and exit the file, then restart the system to 
continue the installation.




warp4
______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.