OSMMLASR - NO LASERDISC VIDEO DISPLAYED ON SCREEN USING VIDEODISC
02/07/96

=======================================================================
       No Laserdisc Video Displayed on Screen Using Videodisc
                      OS/2 2.1 or OS/2 2.11
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

No video appears on the screen when Videodisc is selected from the 
MMPM/2 folder, even when an M-Motion card is being used.

RESOLUTION

MMPM/2 Videodisc support does not allow laserdisc movies to be displayed
on the screen. Videodisc support controls the laserdisc device. 
Baud-rate settings for both the laserdisc and MMPM must be synchronized.

MMPM/2 Videodisc does not display movies on the system monitor if you 
have an M-Motion card or a similar card.

Check the baud rate and parity of the laserdisc and the MMPM/2 DLL 
driver. To modify the baud rate:

1. Open MMPM/2 Setup.
2. Select Laserdisk type.
3. Modify the settings, as required.

Note: As an alternative, update the laserdisc driver section of the 
      MMPM/2.INI file.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.