OSMMSWTC - SOUND-CARD SWITCHES FOR THE DEVICE STATEMENT - OS/2 WARP 01/25/96 ======================================================================= Sound-Card Switches for the DEVICE Statement--All OS/2 Warp Versions ======================================================================= Please Read Entire Document for Full Explanation of Procedures -------------------------------------------------------------- DESCRIPTION This document defines the sound-card parameters you should have in the DEVICE statement of the CONFIG.SYS file. RESOLUTION Following is a typical DEVICE statement that might appear in your CONFIG.SYS file. Parameters within square brackets are optional. DEVICE=C:\MMOS2\SB16D2.SYS 1 1 5 5 220 4 330 /N:SBAUD1$ [/EXT] [/Q] Following are descriptions of the parameters as they appear after DEVICE=C:\MMOS2\SB16D2.SYS: 1 Card number; set this to 1. 1 8-bit DMA channel; valid values are 0, 1, and 3 for Vibra C16S, 1, and 3. 5 16-bit DMA channel; valid values are 5, 6, and 7 for Vibra C16S, 5, and 7 (only for SB16 and SB AWE32). 5 IRQ level; valid values are 2, 5, 7, and 10 (IRQ 10 only supported by SBPro, SB16, and SB AWE32). 220 Adapter base address; valid values are 220, 240, 260, and 280. 4 DMA buffer size in KB. Use any value less than 64. For best results, use 4, 8, or 16 (even numbers). 330 MPU port address; valid values are 300 and 330. /N:SBAUD1$ Logical driver name; used by MMPM/2; leave as-is. /EXT Output MIDI through MPU port. Setting this option sends MIDI messages to the MIDI port rather than to the internal synthesizer. /Q Quiet mode. Suppresses the display of the hardware configuration during startup. ______________________________________________________________________ IBM disclaims all warranties, whether express or implied, including without limitation, warranties of fitness and merchantability with respect to the information in this document. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.