OSOT123F - MAXIMIZING A WINDOW IN LOTUS 1-2-3 FOR OS/2 AND FREELANCE 
GRAPHICS FOR OS/2, RELEASE 2.1
12/30/96

=======================================================================
Maximizing a Window in Lotus 1-2-3 for OS/2 and Freelance Graphics for 
OS/2, Release 2.1 
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

Problems maximizing Lotus 1-2-3 or Freelance Graphics for OS/2 windows 
occur on some systems.

RESOLUTION

If you have a problem maximizing a window of Lotus 1-2-3 for OS/2 or 
Freelance Graphics for OS/2, Release 2.1, do the following:

For Lotus 1-2-3, do the following:

1. Exit Lotus 1-2-3. (If you have Lotus 1-2-3 and Freelance
   Graphics installed in the same directory and they are both
   running, you must also exit Freelance Graphics.)

2. From an OS/2 command prompt, change to the drive and directory where
   Lotus 1-2-3 is installed, for example, type CD \123G; then press 
   Enter.

3. Copy the LOTUSFIX.CMD file and LOTUSFIX patch file located in
   the \OS2 directory to the \123G directory. For example, if you
   have OS/2 Warp 4 installed on the C: drive, type:

     COPY C:\OS2\LOTUSFIX.*; then press Enter.

4. From an OS/2 command prompt, type:

     LOTUSFIX; then press Enter.

   The message, "Patches applied to LD2CORE.DLL" is displayed.

Note: If you have Lotus 1-2-3 and Freelance Graphics both installed
      in the same directory, you do not have to perform the
      following steps for Freelance Graphics. The previous steps
      applied the patch to both.

For Freelance Graphics, do the following:

1. Exit Freelance Graphics.

2. From an OS/2 command prompt, change to the directory where
   Freelance Graphics is installed. In a standard
   installation it is located in the \FLG directory.

3. Copy the LOTUSFIX.CMD file and LOTUSFIX patch file located
   in the \OS2 directory to the \FLG directory. For example, if
   you have OS/2 Warp 4 installed on the C: drive, type:

      COPY C:\OS2\LOTUSFIX.*; then press Enter.

4. From an OS/2 command prompt, type:

      LOTUSFIX; then press Enter.

   The following message displays:

   Patches applied to LD2CORE.DLL

warp4
______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.