OSPRHPSW - SWITCHING THE HP LASERJET IIID FROM PCL TO POSTSCRIPT
02/02/96

=======================================================================
        Switching the HP LaserJet IIID from PCL to PostScript
                         All OS/2 Releases
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

This document describes how to switch the printer mode of the
Hewlett-Packard LaserJet IIID from PCL to PostScript

RESOLUTION

1. Change to the SPOOL directory; then type MD SPPAGE to create the
   MPPAGE subdirectory.

2. Copy TOPCL.ASC and TOPS.ASC to the SPPAGE subdirectory. (These are
   the files that deal with mode switching.)

3. Create the file, PCLSEP.PG, with the following entry:

      & 1 & F "C:\SPOOL\SEPPAGE\TOPCL.ASC

4. Create the file, PSSEP.PG, with the following entry:

      & 1 & F "C:\SPOOL\SEPPAGE\TOPS.ASC

5. Create a printer icon for PCL and one for PostScript.

6. Open the settings for the PostScript printer; then select the Print
   option.

7. In the Separator file field, type the following (x is the drive
   where OS/2 is installed):

      x:\SPOOL\SEPPAGE\PSSEP.PG

8. Close the settings.

9. Repeat the same procedure for the PCL printer, adding
   x:\SPOOL\SEPPAGE\PCLSEP.PG in the Separator file field.

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.