OSVIMACH - INSTALL.EXE DOES NOT WORK WITH ATI MACH64 VIDEO ADAPTER
01/26/96

=======================================================================
       INSTALL.EXE Does Not Work with ATI MACH64 Video Adapter
                         All OS/2 Releases
=======================================================================

Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------

DESCRIPTION

Newer MACH64 video adapters do not have electrically erasable 
programmable read-only memory (EEPROM); therefore, you must use 
OS2INST.EXE instead of INSTALL.EXE.

RESOLUTION

To determine if the MACH64 is one with no EEPROM, look at the chip on 
the adapter. It will have a number similar to 113-26910-110. The 269 
portion of the number indicates the bus architecture. If the two 
numbers immediately to the right of the 269 portion are 11 or higher, 
the adapter has no EEPROM, and you must use OS2INST.EXE instead of 
INSTALL.EXE. (In our example, the numbers are 10, indicating the 
adapter DOES have EEPROM.)

______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including 
without limitation, warranties of fitness and merchantability with 
respect to the information in this document. By furnishing this 
document, IBM grants no licenses to any related patents or copyrights.  
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product 
or brand names referenced in this document are the property of their 
respective owners. Consult your product manuals for complete trademark 
information.