Installation Instructions for EduQuest FLASH BIOS Update Diskette Note: You may find it helpful to print or write down these instructions before starting the FLASH BIOS Update utility program. ********************************************************************* The BIOS update on this diskette is for IBM EduQuest model 9614. Note: Another file (CHANGES.NEW) may be on this diskette. If so, it lists problems corrected and features added by this update. You might want to read or print that file before using this diskette to update your computer. ********************************************************************* To update your BIOS: 1. Power off your computer. 2. Insert the FLASH BIOS Update Diskette into diskette drive A. 3. Power on your computer. 4. Choose option #2, Update this machine's BIOS to level 02I, from the main menu. When this flash command is executed, the following messages will appear: "FLASH ROM BIOS image will be updated." "Insert the diskette containing BIOS.BIN in drive A." "Press ENTER to continue or ESC to stop." The BIOS.BIN file is already on this FLASH BIOS Update Diskette. You do NOT have to insert any other diskette, simply press ENTER at this point to proceed with the BIOS update. The following messages will appear: "Reading new BIOS image file (BIOS.BIN) from drive A." "Erasing current BIOS image." "Programming new BIOS image." "Verifying new BIOS." "Turn the computer OFF and REBOOT." The entire flash process should take no longer than 1 minute to run. 5. Turn the computer OFF and remove the FLASH BIOS Update diskette from drive A then turn the computer ON. The new BIOS has been installed and will now take affect on the computer. Note: If you would like to verify the new BIOS version you can do so by entering the System Configuration. The System Configuration is accessed by pressing F2 within 5 seconds of the "Checking System Configuration . . ." message that appears on the screen under the IBM EduQuest logo. Once in the Setup program press F3 to view System Information. The BIOS version can be verified on the System Information screen. ********************************************************************* File: CHANGES.NEW EduQuest FLASH BIOS Level 1.01 02I * Based on previous FLASH BIOS Level 1.01 00I * Will allow the system to recognize two 32 megabyte simms.