This file contains information about installing IDE CD-ROM device drivers on IBM Personal Computers and Servers. Note: There is a READ.ME file on this diskette that provides more detailed information about certain configurations and systems. The following topics are included in the file: 1.0 Installing the IDE CD-ROM Device Driver on OS/2 2.0 Installing CD-ROM Support in DOS/Windows 3.x 3.0 Trademarks and Notices 1.0 Installing the IDE CD-ROM Device Driver on OS/2 ____________________________________________________ To install the IDE CD-ROM Device Driver: 1. Start an OS/2 session. 2. Execute X:\path\CIDCD where X:\path is the full path to the source files. 3. When prompted for Input Source Drive & Path enter the path info from step 2. 4. When prompted for Input Target Drive & Path enter the OS/2 drive letter. 5. Shutdown and reboot to complete the installation. 2.0 Installing CD-ROM Support in DOS/Windows 3.x _________________________________________________ To install the IDE CD-ROM Device Driver: 1. Go to a DOS command prompt. 2. Insert the IBM IDE CD-ROM Drive Option/Device Driver Diskette into your diskette drive. 3. At the DOS command prompt (C:>) type "A:UINSTALL" and follow the instructions on the screen. 4. UINSTALL will prompt you for the source and destination drives. 5. UINSTALL will present a menu of installation options. Each of these installation options is equipped with help menus to aid in understanding their function. Install one or more of the following options as appropriate for your system. o Install IDE CD-ROM DOS/Windows Support Software This option must be selected to install the basic software that supports the IBM IDE CD-ROM drive on DOS systems. o Update for SMARTDRV 4.0 This option must be used if you are using SMARTDRV.EXE version 4.0. Go to the directory which contains SMARTDRV.EXE and type "SMARTDRV ?" to display the version number. See section 1.9 for more information about SMARTDRV. o DOS 6.2+ - Update for SMARTDRV/PhotoCD This option must be used if you have MS-DOS 6.2 or PC-DOS 6.3 and you want to use Kodak PhotoCD or other multi-session discs on your system. See section 1.9 for more information about SMARTDRV. o Win 3.0+ - 32 Bit Disk Driver/Primary IDE Port This option must be used if you installed the IBM IDE CD-ROM on the primary IDE port (or the only IDE port of single-port systems) and you use Windows. 7. Once you have installed the appropriate options, exit the program and re-start your system (Ctrl+Alt+Del) to activate the changes. 3.0 Trademarks and Notices ____________________________________________ IBM and OS/2 are trademarks of the IBM Corporation. Microsoft and and Windows are trademarks or registered trademarks of Microsoft Corporation. Other company, product, and service names may be trademarks or service marks of others. Note to U.S. Government Users -- Documentation related to restricted rights. -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.